摘要
以制氢变换炉卸料口为研究对象,采用热结构耦合方法,计算斜接管与筒体连接处的应力强度。通过对比不同角度斜接管的应力强度,得到斜接管的最优角度。对接管连接处作不同半径的倒圆角后可知:随着倒角半径的增大,斜接管与筒体连接处的最大应力值显著降低。
Taking the discharge port of hydrogen production shift converter as the research object,the stress intensity at the junction of oblique nozzle and cylinder was calculated by thermal structure coupling method.By comparing the stress intensity of the oblique nozzle at different angles,the optimal angle of the oblique nozzle was obtained.The fillet of different radius was made at the junction of the nozzle.The results showed that as the fillet radius increased,the maximum stress at the joint between oblique nozzle and cylinder was significantly reduced.
作者
崔强
梁斌
王郁林
徐娟娟
姜君
文耀华
CUI Qiang;LIANG Bin;WANG Yulin;XU Juanjuan;JIANG Jun;WEN Yaohua
出处
《化工装备技术》
CAS
2018年第6期1-4,共4页
Chemical Equipment Technology
基金
中国石油化工股份有限公司科技项目(317017-19)
关键词
变换炉热
结构耦合
接管角度
倒圆角
Shift converter
Thermal structure coupling
Angle of nozzle
Fillet