期刊文献+

蒸汽转化炉用Fe-Cr-Ni基奥氏体耐热合金的研究进展 被引量:1

Research Progress on Fe-Cr-Ni Based Austenitic Heat-Resistant Alloy Used in Steam Reformer Furnace
下载PDF
导出
摘要 对蒸汽转化炉用Fe-Cr-Ni基奥氏体耐热合金的化学成分以及显微组织和性能在时效及服役过程中的演变规律进行了综述,介绍了Fe-Cr-Ni基奥氏体耐热合金在原始铸态、时效态、蠕变态以及服役态组织中各析出相的变化规律,展望了Fe-Cr-Ni基奥氏体耐热合金及其构件的未来研究方向。 The chemical composition and the microstructure and property evolution during aging and serviceof Fe - Cr - Ni based austenitic heat - resistant alloy for steam reformer furnace are reviewed.The precipitates evolutionin as - cast , aging ,creepand service state structure of Fe - Cr - Ni based austenitic heat - resistant alloy is described.Thefuture study direction of Fe - Cr - Ni based austenitic heat- resistant alloy and its components is prospected.
作者 洑阳成明 郭晓峰 巩建鸣 FUYANG Chengming;GUO Xiaofeng;GONG Jianming(Key Lab of Design and Manufacture of Extreme Pressure Equipment , Jiangsu Province , School of Mechanical and Power Engineering , Nanjing Tech University , Nanjing 211816, China)
出处 《机械工程材料》 CAS CSCD 北大核心 2018年第12期1-8,共8页 Materials For Mechanical Engineering
基金 国家重点研发计划项目(2017YFF0210401).
关键词 奥氏体耐热合金 显微组织 性能 析出相 austenitic heat - resistant alloy microstructure property precipitate
  • 相关文献

参考文献7

二级参考文献63

  • 1侯重耀.苯乙烯脱氢装置蒸汽过热炉炉管缺陷的分析与探讨[J].化工施工技术,1995,17(3):36-40. 被引量:2
  • 2李海英,祝美丽,张俊善,屈献永.渗碳、蠕变共同作用下HK40和HP钢乙烯裂解炉管损伤过程模拟[J].机械工程材料,2005,29(11):17-20. 被引量:5
  • 3刘志国.合金元素对耐热钢组织及性能的影响[J].材料开发与应用,1997,12(1):17-21. 被引量:10
  • 4Nawancy Y V. Degradation of mechanical strength of pyrolysis furnace tubes by high-temperature carburization in a petrochemical plant [J]. Engineering Failure Analysis, 2009, 16 (7): 2171-2178.
  • 5Yin Ru-chuan. Carburization of 310 stainless steel exposed at 800- 1 100℃ in 2% CH4/H2 gas mixture [J]. Corrosion Science, 2005, 47(8):1896-1910.
  • 6Wu X Q, Jing H M, Zheng Y G, etal. Coking of HP tubes in ethylene steam cracking plant and its mitigation [J]. British Corrosion Journal, 2001, 36(2) : 121- 126.
  • 7Guan Kai-shu, Xu Hong, Wang Zhi-wen. Analysis of failed ethylene cracking tubes [J]. Engineering Failure Analysis, 2005, 12(6): 420-431.
  • 8Grabke H J, Guthrie J E. Points to be considered in carburization testing of alloys [J].Materials and Corrosion, 1998, 49(4): 278-281.
  • 9She nLimin(沈利民),Gong Jianming(巩建呜),Tang Jianqun(唐建群)et al.上海交通大学学报[J],2010,44(5):605.
  • 10Wu Xinqiang(吴欣强),Yang Yuansheng(杨院生),Zhan Qian(詹倩)et al. 金属学报[J],1998,34(10):1044.

共引文献48

同被引文献5

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部