摘要
碳纤维增强树脂基复合材料(CFRP)在航空、汽车、舰船、海洋等工业中用量迅速增加。同时,如铝合金等金属材料在这些工业中仍然广泛应用。因此,CFRP和金属材料之间的连接技术是航空、汽车等此类工业中所面临迫切需要解决和发展的关键问题之一。本文综述了CFRP和金属连接技术的一些研究成果。总结了胶接连接、螺栓连接、焊接、金属插入连接以及基于塑性变形连接(如自穿孔铆接、热铆接、无铆链接、摩擦焊接等)技术的实现和连接材料类型。
The use of carbon fiber-reinforced polymer (CFRP)in aviation,automobile,marine and offshore,etc.increases sharply. The metals such as aluminum alloy are still widely used in these industries.Then,the joining technology of CFRP-metal is one of the key problems urgently to be solved and developed in these industries,especially in aviation industries.Thus,this paper gives a review on the joining processes of carbon fiber-reinforced polymer and metal.The implementation processes and joining material types of adhesive bonding,bolt connection,riveting,welding,'z-pin'(pin inserts),and joining (such as self-pierce riveting,hot riveting,mechanical clinching,friction welding)by plastic deformation,were summarized.
作者
张大伟
张琦
樊晓光
赵升吨
Zhang Dawei;Zhang Qi;Fan Xiaoguang;Zhao Shengdun(Key Laboratory of EducaUon Ministry for Modem Design and Rotor-Bearing System,Xi'an Jiaotong University,Xi'an 710049,China;State Key Laboratory of Solidification Processing,Northwestem Polytechnical University,Xi'an 710072,China)
出处
《稀有金属材料与工程》
SCIE
EI
CAS
CSCD
北大核心
2018年第12期3686-3696,共11页
Rare Metal Materials and Engineering
基金
National Natural Science Foundation of China(51675414)
the Fund of the State Key Laboratory of Solidification Processing in NWPU(SKLSP201623)