摘要
激光技术已应用于许多行业,其中在3D打印中激光技术主要用于金属粉末或陶瓷的烧结工艺过程中。本次论文论述了激光技术在3D打印中的作用和他们的发展趋势,3D打印中选择性激光烧结的基本工作机理以及其工艺,阐明了激光技术在3D打印中的地位无可替代,激光3D打印技术的作用不可估量。
Laser technology has been used in many industrial industries,in which 3D printing is mainly used in the metal powder or ceramic sintering process.In fact,no matter what kind of material 3D printing can use laser technology but the cost is slightly expensive,is a lot of people cannot accept,so these materials only in special circumstances will use the laser for processing.Due to the various characteristics of the laser,the energy source of the sintering process of metal powder and ceramic is currently the most effective and the most suitable,and the proportion of the position of the laser in the 3D printing will also become more and more important.
作者
李宏棋
LI Hongqi(Institute of Mechanical and Electrical Engineering,Hankou University,Wuhan,Hubei 430212)
出处
《科教导刊》
2018年第35期41-42,共2页
The Guide Of Science & Education
基金
湖北省高等学校战略性新兴(支柱)产业人才培养计划本科项目(新一代信息技术)[鄂教高(2013)11号]
