摘要
本文通过H08Mn现场工艺实践,研究不同工艺条件下钢水中溶解氧含量和全铝含量。结果表明:通过将精炼炉钢水Alt含量控制在0.0060%以内,溶解氧含量控制在0.0030%~0.0050%,实现了H08Mn钢15炉连浇,且铸坯无皮下气泡缺陷,线材性能满足用户要求。
In this paper, the dissolved oxygen content and total aluminum content in molten steel under different process conditions were studied by H08 Mn on-site process practice. The results show that by controlling Alt content of refining steel within 0.0060% and the dissolved oxygen content at 0.0030%~0.0050%, 15 heats continuous casting of H08 Mn steel is realized and the casting billet has no subcutaneous bubble defects, and the wire performance meets the user requirements.
作者
常全举
任文卓
Chang Quanju;Ren Wenzhuo(Steel Making and Rolling Plant of Hongxing Iron &Steel Co.Ltd.,Jiuquan Iron and Steel (Group)Corporation,Jiayuguan,Gansu,735100)
关键词
溶解氧
全铝
连浇
dissolved oxygen content
Alt content
continuous casting