摘要
实验室为了保持0.3级标准测力仪检定/校准状态的置信度,在正确使用、维护标准测力仪的同时,还必须认真做好期间核查和测量装置误差分析,这将有助于我们及时发现和排除检定/校准过程中的异常变异,使装置测量误差尽量小,确保试验机检定/校准结果的一致性。
In order to maintain the 0.3 standard dynamometer verification calibrated state of the standard dynamometer in laboratory, in the correct use, it is necessary to check and measure the error of the device during the proper use and maintenance of the standard dynamometer, which will help us to detect and eliminate the test/calibration process, the measurement error of the device is as small as possible to ensure consistency of the test machine calibration/calibration results.
作者
周文
Zhou Wen(Hunan Xiangtan Institute of Measurement and Testing,Xiangtan 411100)
出处
《仪器仪表标准化与计量》
2018年第5期38-41,共4页
Instrument Standardization & Metrology
关键词
工测力仪标准装置
核查方案
不确定度评定
Dynamometer Standard Device
Verification Program
Uncertainty Assessment