期刊文献+

高Nb-TiAl基合金锻压饼材的拉伸性能 被引量:1

TENSIL PROPERTIES OF TWO KINDS OF FORGINGD TiAl-BASED ALLOY CONTAINING HIGH Nb
下载PDF
导出
摘要 用自制的拉伸夹具测试了两种高Nb TiAl基合金的室温和高温拉伸性能 ,并对实验结果进行了分析讨论。结果表明 ,双态组织比片层组织有更高的强度 ,这符合一般TiAl合金的强度规律。且两种合金的室。 The tensile propeties of TANB alloy and TANM alloy at room and high temperatures were measured using the gripping device made by ourself. The test results were analyzed and discussed. The results show that two alloys with DP microstructure have higher strength than those with FL microstructure for TiAl based alloys contaning Nb.This conforms to the strengthening law of conventional TiAl alloy. The room and high temperature strength for both TANB and TANM alloys are higher than that of the conventional TiAl alloy.
出处 《理化检验(物理分册)》 CAS 2002年第4期142-144,共3页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
基金 国家自然科学基金 (5 9895 15 0 0 12 ) "863"高技术新材料领域共同资助
关键词 拉伸夹具 高Nb-TiAl基合金 双态组织 片层组织 拉伸性能 钛铝基合金 锻压饼材 试验研究 Gripping device TiAl based alloy containing high Nb DP microstructure FL microstructure
  • 相关文献

参考文献2

二级参考文献1

  • 1Yoo M H,Mater Sci Eng A,1992年,153卷,470页

共引文献10

同被引文献8

  • 1LIU Yong,LIU Feng xiao,HUANG Bai yun,ZHOU Ke chao,ZHANG Chuan fu (State Key Lab for Powder Metallurgy, Central South University, Changsha 410083, China).Microstructural evolution of TiAl base alloy during three-stepped thermo-mechanical treatment[J].Journal of Central South University of Technology,2001,8(1):9-12. 被引量:1
  • 2APPEL,WAGNER R.Microstructure and deformation of two-phase γ-titanium aluminide[J].Mater Sci Eng,1998,R22(5):187-262.
  • 3KIM Y W.Wrought Ti Al alloy design[J].Trans Nonferrous Met Soc China,1999,9(Supp 1):298-308.
  • 4CHEN G,ZHANG W,WANG Y,et al.Ti-Al-Nb intermetallic alloys based on the ternary intermetallic compound[A].Darolia R,Lewandowski J J,Liu CT,et al.Structural Intermetallics[M].Warrendale(PA):TMS,1993.319-324.
  • 5CHEN G,ZHANG W,LIU Z,et al.Microstructures and properties of high Nb containing TiAl alloys[A].Kim Y W,Dimiduk D M,Loretto M H.Gamma Titanium Aluminides[M].Warrendale(PA):TMS,1999.371-380.
  • 6SEMIATIN S L,SEETHARAMAN V,WEUSS I.Hot workability of titanium ahminide alloys-an overview[J]Mater Sci Eng,1998,A243:1-24.
  • 7MARTIN P L,RHODES C G.Thermomechanical processing effects on microstructure in alloy based on γ-TiAl[A].Darolia R,Lewandowski J J,Lju C T,et al.Structural Intermetallics[M].Warrendale(PA):TMS.1993.177-186.
  • 8闫蕴琪,王文生,张振祺,罗国轸,洪权,周廉.高Nb-TiAl基合金的开坯锻造[J].热加工工艺,2000,29(1):32-33. 被引量:3

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部