期刊文献+

加速器驱动系统靶区流动可视化研究 被引量:2

Flow Visualization of Spallation Target in Accelerator-driven Subcritical Reactor System
下载PDF
导出
摘要 在加速器驱动次临界系统 (ADS)靶件模型上进行二维流动可视化研究。示踪粒子为直径 0 5mm的聚苯乙烯球状颗粒 ,采用片激光法对流场进行显示和KappaCCD数码摄像系统对流场进行实时拍摄 。 Flow visualization is made in a 2 D full scale model test section of the ADS target window design, using water as the working fluid. Flow patterns around the simulated target beam window are visualized by laser light sheet with polystyrene spherical pellets (0.5 mm in diameter) as the tracer particles, and recorded with high resolution CCD camera. In the paper the principle and technique of flow visualization with laser light sheet are presented, the obtained flow pattern images are given and discussed.
出处 《原子能科学技术》 EI CAS CSCD 2002年第2期175-177,共3页 Atomic Energy Science and Technology
基金 国家重点基础研究发展规划项目 (G19990 2 2 60 6)
关键词 加速器驱动系统 嬗变靶 流动可视化 片激光 流型 accelerator driven system spallation target flow visualization laser light sheet flow pattern
  • 相关文献

参考文献2

  • 1[1]Gudowski W. Accelerator-driven Systems--Survey of the Research Programs in the World[C]. Nuclear Methods for Transmutation of Nuclear Waste[J]. Singapore:World Scientific Publishing Co Pte Ltd, 1996. 3~25.
  • 2[2]Yefimov E. The Main Results of Feasibility Study of Liquid Metal Targets[R]. Russia: Institute of Physics and Power Engineering, 1998.

同被引文献14

  • 1Mantha V, Chaudhary R. Intense heat simulation studies on window of high density liquid metal spallation target module for accelerator driven systems[J]. International Journal of Heat and Mass Transfer, 2006, 49:3728-3745.
  • 2Michelato P, Cavaliere E. Vacuum interface analysis of a windowless spallation target for accelerator-driven systems[J]. Nuclear Science and Engineering, 2007, 157: 95-109.
  • 3Koji Morita, Wemer Maschek, Michael Flad, et al. Thermophysical properties of lead-bismuth eutectic alloy in reactor safety analyses[J]. Journal of Nuclear Science and Technology, 2006, 43(5): 526-536.
  • 4Alchagirov B B, Shamparov T M, Mozgovoi A G. Experimental investigation of the density of molten lead-bismuth eutectic[J]. Materials High Temperatures, 2003, 41(2): 210-215.
  • 5OECD/NEA. Handbook on lead-bismuth eutectic alloy and lead properties[M]. Materials Compatibility, Thermal-hydraulics and Technologies, 2007:29-37.
  • 6Lyon R N. Liquid metal Government Printing Office, handbook[M]. Washington 1952:21-30.
  • 7Kutateladze S S, Borishanskii V M, Novikov I I, et al. Liquid-metal heat transfer media[M]. New York: Atomic Press, 1959:32-35.
  • 8Kirillov P L, Bogoslovskaya G E Heat transfer in nuclear installations[M]. Moscow: Energoatomizdat, 2000:53-62.
  • 9HultgrenR, Desai P D, Hawkins D T, et al. Selected values of the thermodynamic properties of binary alloys[M]. Washington: American Society for Metals, 1973:41-47.
  • 10The International Nuclear Safety Center of Argonne National Laboratory. Pb-Bi eutectic viscosity[OL]. http://www.insc.anl.gov/, 2012.

引证文献2

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部