期刊文献+

薄壁箱形结构干燥炉的设计与仿真分析 被引量:4

Design and Simulation of Drying Furnaces with Thin walled Box
下载PDF
导出
摘要 针对干燥炉薄壁箱形结构采用经验设计方法而产生的不安全、耗材大等问题 ,以及箱形结构的分析还没有完整的理论精确解 ,采用有限元仿真分析软件 ANSYS对一智能系统控制的薄壁箱形结构干燥炉进行了仿真分析 。 The experiential method for design of drying furnances with thin walled shell is commonly used, which may lead to many problems, such as spillage of material and unsafe during operation. Apart from that, no exact solution could be obtained for analysis of a thin walled part structure by the theoretical method. In this work, the finite element method by the analysising software ANSYS was used to simulate a thin walled box heater. The results and analysis of this simulation provide a theoretical basis of heater design.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2002年第3期53-55,共3页 Transactions of the Chinese Society for Agricultural Machinery
基金 宁夏回族自治区科委攻关项目 (项目编号 :2 0 0 10 180 5 )
关键词 干燥炉 热应力 温度载荷 薄壁箱形结构 有限元分析 结构参数 仿真分析 炉体结构 Drying furnace, Thermal stress, Temperature load
  • 相关文献

参考文献3

  • 1王成 邵敏.有限单元法基本原理与数值方法[M].北京:清华大学出版社,1988.51-91.
  • 2机械工程师手册编辑委员会.机械工程师手册[M].北京:机械工业出版社,1989..
  • 3库克R D.有限元分析的概念和应用[M].北京:科学出版社,1981..

共引文献5

同被引文献24

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部