期刊文献+

不同比例ZrP99包埋材料对钛铸件质量影响的实验研究 被引量:2

Experimental study on quality of the Ti castings effected by ZrP99 emboding materials with differ-ent proportions
下载PDF
导出
摘要 目的 研究不同比例ZrP99包埋材料对钛铸件质量影响。方法 通过调整ZrP99包埋材料中ZrO2的含量,分别包埋铸造钛件,用钛金属表面性状评估、铸件的气孔含量分析、显微硬度测试等技术对钛铸件的质量进行分析,并与日本产铸钛包埋材料包埋铸造的钛铸件进行比较。结果 ZrP993#所铸钛件与标准铸造钛件各种性能相似,可以用于临床。结论 ZrP993~5#所铸钛件均较理想,但其中ZrP993#包埋材料为最价廉的包埋材料。 Obiective The Ti castings were invested respectively by regulating the ZrO2 content in the ZrP99 investment material. Methods And then the Ti surface characters were evaluated, the gas holes content was analyze the quality of the Ti castings, comparing with the castings invested by Ti investment manufactured in Japan. Results The characters of the castings from ZrP993 #were close to those of the standard castings so that ZrP993 #investment can be used to clinical practice. Conclusion All the casting from ZrP993-5# were almost ideal,but ZrP993# investment was cheapest.
出处 《辽宁医学杂志》 2002年第2期67-69,共3页 Medical Journal of Liaoning
关键词 ZrP99包埋材料 钛铸件 二氧化锆 最佳含量 质量分析 牙科材料 ZrO2 investment metallography analysistitanium
  • 引文网络
  • 相关文献

参考文献3

  • 1[1]Hero H . Syverud M,Waarli M Dent Mater Med,1994 ;12(2) :238
  • 2[2]铸造手册.第4卷.机械工业出版社,1994
  • 3[3]ChaiTI,Strein R. S. Porosity and accuracy of multiple unit castings J proseth Dent,1995 ;73:534

同被引文献15

  • 1骆小平,郭天文,欧阳官,邓春枝.用电子显微探针分析齿科包埋料元素Si,Zr和Al在铸钛表层的分布[J].第四军医大学学报,1996,17(3):228-229. 被引量:3
  • 2Chai TI,Stein RS.Porosity and accuracy of multiple-unit titanium castings.J Prosthet Dent.1995,73(6):534-541.
  • 3Mori T,Jean-Louis M,Yabugami M,et al.The effect of investment type on the fit of cast titanium crowns.Aust Dent J,1994.39(6):348-352.
  • 4Ida K,Takeuehi M,Togaya T,et al.Studies on the dental casting of titanium alloy(Part l.Casting of pure titanium).J Jpn Res Soc Dent Mater Appl,1980,37:45-52.
  • 5Ida K,Togaya T,Tsutsumi S,et a1.Effect of magnesia investments in the dental casting of pure titanium or titanium alloys.Dent Mater J,1982,1(1):8-21.
  • 6Luo XP,Guo TW,Ou YG,et al.Titanium casting into Phosphate bonded investment with zirconite.Dent Mater,2002,18(7):512-515.
  • 7Miyakawa O,Watanabe K,Okawa S,et al.Layered structure of cast titanium$urfflee.Dent Mater J,1989,8(2):175-185.
  • 8Low D,Mori T.Titanium full crowns casting:thermal expansion of investment and crown accuracy[J].Dent Mater,1999,15(2):185-190.
  • 9Morten Syverud,Hakon Hero.Mold filling of Ti casting using investment with different gas permeability [J].Dent Mater,1995,11(1):14-18.
  • 10Takahashi J,Kimura H,Lautenschlager EP,et a1.Casting pure Titanium into commericial phosphate-bonded SiO2 investment molds[J].Dent Res,1990,69(12):1800-1805.

引证文献2

二级引证文献7

;
使用帮助 返回顶部