摘要
用 18Cr2Ni4WA钢 ,经渗碳淬火和冷处理后制成试样 ,然后在边界条件下与T10金属盘进行对磨实验 ,并利用扫描电镜分析了磨损表面。
The specimens were made of carburized and quenched 18Cr2Ni4WA steel. And then the specimens were tested for boundary lubricated sliding wear against T10 steel plate by the pin on disk method. The worn surface morphology and boundary lubricated wear mechanism were analyzed by SEM.