期刊文献+

修正步冷温度曲线试验研究 被引量:2

The test study on the modified temperature curve for step cooling
下载PDF
导出
摘要 按修正步冷温度曲线对经步冷脆化的 2 .2 5Cr 1Mo和在加氢反应器内运行 5a的 2 2 5Cr 1Mo试块进行了修正步冷试验 ,评定了材料的回火脆性。结果表明 ,按修正步冷曲线进行修正步冷试验能使已经脆化的材料进一步脆化 ,为加氢反应器材料损伤的研究提供了一条途径。 Based on the modified temperature curve for step cooling,the modified step cooling tests were performed on the 2.25Cr 1Mo steel block which was removed from a hydrogenation reactor after 5 years operation and on the material of 2.25Cr 1Mo steel which was embrittled by step cooling.In the mean time ,the susceptibility to temper embrittlement of 2.25Cr 1Mo steels was assessed .The test results showed that an embrittled material's susceptibility for further embrittling could be predicted by the modified step cooling heat treatment according to the modified temperature curve for step cooling. The method for the modified step cooling test provided a way for studying damage to the material which is widely used for hydrogenation reactors.
出处 《石油化工设备》 CAS 2002年第3期1-3,共3页 Petro-Chemical Equipment
关键词 加氢反应器 2.25CR-1MO钢 修正步冷温度曲线 脆化 hydrogenation reactor 2.25Cr 1Mo steel modified temperature curve for step cooling embrittlement
  • 相关文献

参考文献2

二级参考文献2

共引文献13

同被引文献29

  • 1赵建平,张秀敏,沈士明.材料韧脆转变温度数据处理方法探讨[J].石油化工设备,2004,33(4):29-32. 被引量:55
  • 2周昌玉,赵涛,孙宇.加氢反应器材料回火脆化量预测[J].石油化工设备,2005,34(3):1-3. 被引量:6
  • 3周昌玉,胡桂明,孙宇.作用应力对2.25Cr-1Mo合金钢回火脆性的影响[J].特殊钢,2006,27(6):1-3. 被引量:9
  • 4LI Qing-fen, LI Li, LIU Er-bao, et al. Temper embrittlement dynamics induced by non-equilibrium segregation of phosphorus in steel 12CrlMoV[JI. Scripta Matefialia,2005,53(3) : 309 - 313.
  • 5Olefjord I. Temper embritdement[ J]. International Metals Reviews, 1978,4 : 149 - 163.
  • 6Scott T E. Application of 2-1/4 Cr-O\Mo steel for thick-wan pressure vessels [ C ]. ASTM, STP755, American Society for Testing and Materials, 1982.
  • 7Masaaki Katsumata, Hisashi Takada, Hiromichi Hrano, et al. Temper embrittlement in pressure vessel steel[ J ]. Pressure Techology, 1981,19 (3) : 120 - 126.
  • 8Doucet Anne B. Effects of Service Exposure of 2.25Cr-Mo Pressure Vessel Steel in a Heavy oil Hydro Cracking [ M]. Fitness-for-Service and Decisions for Petroleum and Chemical Equipment, ASME, 1995 : 407 - 411.
  • 9Mclean D. Grain Boundaries in Metals[M]. London: Oxford University Press, 1957.
  • 10Guttmann M. Equilibrium segregation in a ternary solution: a model for temper embrittlement [J]. Surface Science, 1975,53:213 -227.

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部