摘要
通过电液成形试验 ,研究了各种工艺参数与铝合金电液成形性能的相互关系 。
出处
《锻压技术》
CAS
CSCD
北大核心
2002年第3期29-31,共3页
Forging & Stamping Technology
基金
自然基金支持项目 (59750 37)
参考文献1
-
1李铁生.爆炸成形原理[M].北京:国防工业出版社,1983..
同被引文献16
-
1邓琦林,刘宏军,周锦进.液电成形金属零件的实验研究[J].航空精密制造技术,1999,35(4):15-17. 被引量：2
-
2黄文力,孙广生,王珏,严萍.液体介质击穿机理研究进展[J].高压电器,2005,41(2):131-134. 被引量：11
-
3Gillard A J, Golovashchenko S F, Mamutov A V. Effect of quasi-static prestrain on the formability of dual phase steels in electrohydraulic forming[J]. Journal of Manufacturing Processes, 2013, 15(2): 201-218.
-
4Golovashchenko S F, Gillard A J, Mamutov A V, et al. Electrohydraulic trimming of advanced and ultra high strength steels[J]. Journal of Materials Processing Technology, 2014, 214(4): 1027-1043.
-
5Golovashchenko S F, Gillard A J, Mamutov A V. Formability of dual phase steels in electrohydraulic forming[J]. Journal of Materials Processing Technology, 2013, 213(7): 1191-1212.
-
6Golovashchenko S F, Bessonov N M, Ilinich A M. Two-step method of forming complex shapes from sheet metal[J]. Journal of Materials Processing Technology, 2011, 211(5): 875-885.
-
7Rohatgi A, Stephens E V, Davies R W, et al. Electro-hydraulic forming of sheet metals: Free-forming vs. conical-die forming[J]. Journal of Materials Processing Technology, 2012, 212(5): 1070-1079.
-
8Rohatgi A, Stephens E V, Soulami A, et al. Experimental characterization of sheet metal deformation during electro-hydraulic forming[J]. Journal of Materials Processing Technology, 2011, 211(11): 1824-1833.
-
9Kim S B, Huh H, Bok H H, et al. Forming limit diagram of auto-body steel sheets for high-speed sheet metal forming[J]. Journal of Materials Processing Technology, 2011, 211(5): 851-862.
-
10Gillard A J, Golovashchenko S F, Mamutov A V. Effect of quasi-static prestrain on the formability of dual phase steels in electrohydraulic forming[J]. Journal of Manufacturing Processes, 2013, 15(2): 201-218.
二级引证文献2
-
1于海平,郑秋丽,安云雷.电液成形技术研究现状及发展趋势[J].精密成形工程,2017,9(3):65-72. 被引量：1
-
2赵景林,王志强,王进君,张东东,李国锋.基于Kriging模型的水中放电沉积能量优化分析[J].强激光与粒子束,2023,35(3):145-154. 被引量：3
-
1于海平,孙立超,张旭,李春峰.铝合金管坯电液成形试验研究[J].锻压技术,2016,41(3):37-43. 被引量：1
-
2陈先有,崔晶.飞机钣金零件高能成形工艺分析[J].航空科学技术,2007(3):35-37.
-
3崔晶,陈先有.飞机钣金零件高能成形工艺分析[J].国防技术基础,2008(3):57-58.
-
4陈义.基于电片液压成形的有限元建模实验[J].山东工业技术,2016(17):246-248.
