期刊文献+

纳米3Y-TZP陶瓷薄板超塑性成形研究 被引量:5

Study on superplastic forming for nano 3Y-TZP sheet
下载PDF
导出
摘要 采用化学沉淀法制备了纳米级 3Y TZP粉体 ,制得了粒径尺寸为 8~ 16nm ,少团聚的粉体。热压烧结得到相对密度为 97% ,晶粒尺寸为 10 0nm~ 2 5 0nm的 3Y TZP陶瓷片。通过研究成形温度对成形性能的影响 。 Y\|TZP nano powders were synthesized by chemical precipitation Then, weakly agglomerated powders of 3Y\|TZP with grain size of 8~16nm was obtained After hot pressing, ceramic discs which relative density is 97% and grain size is 100nm~250nm were obtained The influence of forming temperature on the formability of nano ceramic discs has been studied Hemispherical caps of nano ceramic were made by superplastic forming processing finally
机构地区 哈尔滨工业大学
出处 《锻压技术》 CAS CSCD 北大核心 2002年第3期31-33,共3页 Forging & Stamping Technology
关键词 纳米粉体 团聚 超塑成形 纳米陶瓷 Nano powders Agglomerate Superplastic forming
  • 相关文献

同被引文献21

  • 1赵长财,王银思,李晓丹,董国疆,梁辰,左虹.固体颗粒介质的传压性能实验研究[J].塑性工程学报,2006,13(2):85-88. 被引量:10
  • 2李涛,郎利辉,周贤宾.先进板材液压成形技术及其进展[J].塑性工程学报,2006,13(3):30-34. 被引量:49
  • 3赵长财,李晓丹,王银思,董国疆.固体颗粒介质的管材成形新工艺试验研究[J].塑性工程学报,2006,13(3):56-59. 被引量:5
  • 4赵长财,王银思,李晓丹,董国疆,刘树彬.固体颗粒介质成形新工艺及变形研究[J].塑性工程学报,2007,14(3):54-59. 被引量:2
  • 5Wakai F, Sakaguchi S, Kanayama K. Ceramic Materials and Components for Engines[C]//Proceedings of the Second International Symposium. Luebeck-Travemuende: VDKG, 1986:1205-1207.
  • 6Lang L H, Joachim D, Karl B N. Investigation Into Hydrodynamic Deep Drawing Assisted by Radial Pressure Part Ⅱ. Numerical Analysis of the Drawing Mechanism and the Process Parameters[J]. Journal of Materials Processing Technology ,2005,166 : 150-161.
  • 7Wakai F,Sakaguchi S, Kanayama K. Ceramic Mate-rials and Components for Engines[C]//Proceedings of the Second International Symposium. Luebeck-Travemuende : VDKG, 1986 : 1205-1207.
  • 8Xue L A, Chen I W. Dynamic Recrystallization: Mechanical and Microstructural Consideration. J. Am. Ceram. Soc., 1996, 79: 233-237
  • 9Davies T J, Ogwu A A, Ridley N, et. al. Deformation of Aluminum at High Temperatures and Strain Rates. Acta Mater., 1996, 44: 2373-2375
  • 10Kottada R S, Chokshi A H. The High Temperature Tensile and Compressive Deformation Characteristics of Magnesia Doped Alumina. Acta Mater., 2000, 48: 3905-3915

引证文献5

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部