期刊文献+

热交联法制备低含氧量碳化硅纤维初步研究 被引量:4

Study of SiC Fibers with Low Oxygen Content Prepared by Thermal Cross linking
下载PDF
导出
摘要 通过对低预氧化程度的聚碳硅烷 (PCS)纤维进行热交联处理 ,降低SiC纤维中的氧含量 ,经过二步烧成法制备出机械性能及高温耐氧化性能优良的连续SiC纤维。通过IR、XRD、SEM、元素分析仪等分析手段系统研究了研究了热交联碳化硅纤维的热交联处理的工艺条件、烧成工艺 ,研究了热交联碳化硅纤维的组成、微观结构及其与纤维的力学性能。 SiC fibers with good high temperature resistance are prepared by PCS fibers with low oxygen content(LO PCS) through thermal cross linking(TC) reaction.The sintering of the LO PCS with two steps and the condition of the reaction is studied by element analysis?IR?XRD?SEM. And the relation between the structure and the properties of the fibers are systematically studied.
出处 《国防科技大学学报》 EI CAS CSCD 北大核心 2002年第3期94-97,共4页 Journal of National University of Defense Technology
基金 国家部委项目 (12 0 110 8880 3 ) 国家部委基金项目 (5 14 12 0 2 0 2 0 1KG0 13 6)
关键词 热交联 低含氧量 磁化硅纤维 力学性能 制备方法 微观结构 高温抗氧化性 thermal cross linking low oxygen content SiCfibers
  • 相关文献

参考文献7

  • 1冯春祥,李晓霞,宋永才.连续碳化硅纤维制备工艺的基础研究[J].国防科技参考,1997,18(4):51-56. 被引量:2
  • 2范小琳.低含氧量碳化硅纤维的研制[D].长沙:国防科学技术大学学位论文,1999.
  • 3李晓霞.连续SiC纤维制备工艺的基础研究[D].长沙:国防科学技术大学学位论文,1998.
  • 4Sacks M D, et al. Characterization of Polymer-derived SiC Fibers with Low Oxygen Content[J]. Near Stoichiometric Composition and Improved Thermal Mechanical Stability. Ceram. Eng. Sci. Proc., 1995, 16(4): 25-35.
  • 5Toreki William. Compos. Sci, Tech. 1994, 51: 145.
  • 6Man T,Hecht N L, Mccullum D E, Hoenigman J R, Kim H M, Katz A P,Lipsitt H A. Thermal Stability of SiC Fibers (Nicalon) [J].J.Mater. Sci., 1984, 19: 1191-1201.
  • 7冯春祥,宋永才.超耐热SiC纤维的研究[J].材料导报,1994,8(3):67-70. 被引量:8

共引文献8

同被引文献32

  • 1范小琳.[D].国防科技大学材料工程与应用化学系,1999.
  • 2范小琳.[D].国防科技大学,1999.
  • 3Takeda M, et al. Microstructure and Oxidation Behavior of Silicon Carbide Fibers Derived From Polycarbosilane[J].J.Am.Ceram.Soc.,83(5):1171-1176,2001.
  • 4Hasegawa Y. New Curing Method for Polycabosilane to Thermally Stable SiC Fibers[J]. Com.Sci.and Tech.,51:161-166,1994.
  • 5Sacks M D, et al.Characterization of Polymer-derived SiC Fibers with Low Oxygen Content, near Stoichiometric Composition and Improved Thermal Mechanical Stability[J]. Ceram. Eng. Sci. Proc., 1995, 16(4): 25~35.
  • 6Takeda M, Imai Y, Ishikawa T, et al. Properties of the Low Oxygen Content SiC Fiber on High Temperature Heat Treatment[J]. Ceram.Eng.Sci.Proc., 1991,12:1007-1018.
  • 7Bouillon E, Mocaer D, Villeneube F et al. Composition - microstructure - property relationships in ceramic monofilaments resulting from the pyrolysis of a polycarbesilane precursor.J. Mater. Sci., 191; (26): 1517.
  • 8Okamura K, Sato M et al. A study on the electron irradiation curing mechanism of polycarbosilane by solid-state ^29Si high-resolution nuclear magnetic resonance spectroscopy. J. Mater. Sci. Lett., 1988; (7): 209.
  • 9Okamura K, Seguchi T. Application of radiation curing in the preparation of polycarbosilane derived SiC fibers. J. Inorg Organomet Polym. , 1992; 2(1) : 171.
  • 10Sugimoto M, Shimoo T, Okamura K et al. Reaction mechanisms of silicon carbide fiber synthesis by heat treatment of polycarbosilane fibers cured by radiation. J. Am. Ceram.Soc., 1995; 78(4): 1013.

引证文献4

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部