期刊文献+

炼铁厂的节能分析与对策研究 被引量:5

ANALYSIS OF ECONOMIZATION ON ENERGY AND COUNTERMEASURE RESEARCH FOR PUDDING PLANT
下载PDF
导出
摘要 运用系统节能的理论 ,分析了物流对钢铁企业炼铁工序的节能影响 ;从工艺和物流两方面提出了采用提高入炉矿品位、降低返矿率、烧结矿环冷余热回收、热风烧结、降低烧结机漏风率等降低炼铁能耗的措施。 Utilizing the theory of systematic energy saving, the effect of material flow on energy saving in ironmaking is analyzed. The ways of reducing energy consumption in ironmaking is put forward in aspects of technology and material flow, such as, improvement of raw material quality, reduction of returns, heat recovery of sinters, hot blast sintering, leakage reducing on sintering machine etc..
出处 《钢铁》 CAS CSCD 北大核心 2002年第6期48-50,共3页 Iron and Steel
关键词 炼铁 节能 物流 烧结矿 余热回收 能耗 ironmaking,energy saving, material flow
  • 相关文献

参考文献4

二级参考文献10

共引文献19

同被引文献47

  • 1赖其翠,甘勤,杨顺龙.攀钢烧结机漏风调查及降低漏风率研究[J].钢铁钒钛,1995,16(1):32-39. 被引量:2
  • 2夏德宏,焦红蕾,张刚,李洪革,安钢.烧结工序中燃烧与传热过程的数值模拟[J].工业炉,2006,28(3):30-32. 被引量:9
  • 3顾伟,翁一武,曹广益,翁史烈.低温热能发电的研究现状和发展趋势[J].热能动力工程,2007,22(2):115-119. 被引量:107
  • 4张威,刘志军,李艳红.数值分析与科学计算[M].北京:清华大学出版社,2008:171-212.
  • 5Torsten Kraft, Hermann Riedel. Numerical simulation of solid state sintefing; model and application[ J']. 2004,24 : 345 - 361.
  • 6Torsten Kraft, Hermann Riedel. Numerical simulation of solid state sintering; model and application [ J ] .Journal of European Ceramic Society. 2004,24 : 345 - 361.
  • 7BAI Pei-kang, CHENG Jun, LIU Bin. Numerical simulation of temperature field during selective laser sintering of polymer-coated molybdenum powder[J] .Trans. Nonferrous Met. Soc. China. 2006,16 : s603 - s607.
  • 8Henrich B, Wonidch A, kraft T. Simulations of the influence of rearrangement during sintering - J ] . Aeta Materialia. 2007,55 : 753 - 762.
  • 9Caputo A C, CardareUi G. Analysis of heat recovery in gassolid moving beds using a simulation approach[J] . Applied Thermal Engineering. 1996,16( 1 ) :89 - 99.
  • 10Jik-chang Leong, Kai-wun Jin, et al. Effect of sinter layer porosity distribution on flow and temperature fields in a sinter cooler [J] .International Journal of Minerals, Metallurgy and Materials,2009,16(3) :265.

引证文献5

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部