期刊文献+

酸性镀铜光亮剂的研究 被引量:2

Study of Brightener for Acidic Copper Plating
下载PDF
导出
摘要 介绍了酸性镀铜光亮剂 ,并与使用较多的两种国外酸铜光亮剂的阴极极化曲线、镀液的深镀能力、均镀能力、耐温工作范围等作了对比。酸铜光亮剂耐高温可达 40℃ ,其深镀能力、均镀能力与国外酸铜光亮剂相当。其阴极极化曲线也与国外酸铜光亮剂的阴极极化曲线形状相似 ,峰值电位和峰值电流相近 ,极化值与极化度近于相等。 A brightener for acidic copper plating had been presented. Cathodic polarization curve, covering power, throwing power and operation temperature range of the brightener had been tested and had been compared with those of two kinds of abroad brightener. The cathodic polarization curve of the brightener is similar to those of the abroad ones'. Covering power, throwing power, polarization value, polarizability, peak point potential and peak point current of the brightener are also almost equal to those of the abroad counterparts.
出处 《电镀与精饰》 CAS 2002年第3期5-8,共4页 Plating & Finishing
关键词 酸性镀铜 光亮剂 研究 光亮镀铜 acidic copper plating brightener bright copper plating
  • 相关文献

参考文献11

  • 1周绍民 张瀛洲 等.某些光亮酸性镀铜添加剂的作用机理[J].厦门大学学报,1980,(1):54-70.
  • 2陈德宝.酸性光亮镀铜光亮剂添加方法的改进[J].电镀与精饰,1982,4(4):39-39.
  • 3周明绰 李素云.“153”型酸性硫酸铜光亮电镀工艺的研究[J].电镀与精饰,1985,7(2):22-27.
  • 4王守琴.电视机调频开关壳体电镀酸性光亮铜的工艺及体会[J].电镀与精饰,1985,7(2):16-16.
  • 5许家园 周绍民.光亮酸性镀铜添加剂的作用[J].电镀与精饰,1986,8(4):20-22.
  • 6朱传焱.光亮酸性镀铜中MN型添加剂的应用[J].电镀与精饰,1986,16(3):35-36.
  • 7吴水清.印制电路板酸性镀铜光亮剂[J].电镀与精饰,1989,11(1):18-23. 被引量:6
  • 8叶云川.镀铜添加剂SH110微观整平性研究[J].电镀与精饰,1990,12(4):26-30. 被引量:2
  • 9吴水清.酸性镀铜光亮剂[J].电镀与环保,1995,15(2):12-15. 被引量:3
  • 10邓文,刘昭林,郭鹤桐.PCB酸性光亮镀铜添加剂[J].电镀与精饰,1995,17(4):39-42. 被引量:10

二级参考文献6

  • 1吴水清.印制电路板酸性镀铜光亮剂[J].电镀与精饰,1989,11(1):18-23. 被引量:6
  • 2许家园,周绍民.转盘电极阳极溶出法测定整平能力[J]厦门大学学报(自然科学版),1986(01).
  • 3叶康民.缓蚀剂的协同效应[J]材料保护,1990(Z1).
  • 4周绍民,张瀛洲,姚士冰,许家园,蔡加勒,陈秉彝,方加福,许书楷.某些光亮酸性镀铜添加剂的作用机理[J]厦门大学学报(自然科学版),1980(01).
  • 5Dennis Anderson,Ron Haak,Cameron Ogden,Dennis Tench,John White. Tensile properties of acid copper electrodeposits[J] 1985,Journal of Applied Electrochemistry(5):631~637
  • 6高萍,何志邦.酸性硫酸铜镀液中氯离子的测定[J].电镀与环保,1992,12(3):31-33. 被引量:2

共引文献34

同被引文献19

  • 1步华,杭东良.新型酸性镀铜添加剂及光亮剂简介[J].材料保护,2004,37(10):59-59. 被引量:4
  • 2刘烈炜,吴曲勇,卢波兰,杨志强.酸性镀铜研究进展[J].电镀与精饰,2004,26(5):13-17. 被引量:10
  • 3张素兰.光亮酸性镀铜[J].电镀与环保,2005,25(3):8-10. 被引量:9
  • 4刘烈炜,张艳清,杨志强.无染料酸性镀铜添加剂的发展状况[J].材料保护,2006,39(6):38-40. 被引量:5
  • 5Chouchane S, Levesque A, Douglade J, et al. Microstruc- tural analysis of low Ni content Zn alloy electrodeposited under applied magnetic field [ J ]. Surface and Coatings Technology,2007,201 (14) :6212-6216.
  • 6Abou-Krisha M M. Electrochemical studies of zinc-nickel codeposition in sulphate bath [ J ]. Applied Surface Sci- ence,2005,252 (4) : 1035-1048.
  • 7Muresan L, Varvara S, Maurin G. Effect of some organic additives upon eopperelectrowinning from sulphate elec- trolytes [ J ]. Hydrometallurgy,2000,4 ( 2/3 ) : 161 - 169.
  • 8Farid H, Hamid Z A, Abdel A. Controlling factors affecting the stability and rate of electroless copper plating[ J]. Ma- terials Letters,2004,58 (1/2) : 104-109.
  • 9Tantavichet N, Pritzker M D. Effect of plating modethio- urea and chloride on the morphology of copper deposits produced in acidic sulphate solutions [ J ]. Electrochimica Acta,2005,50(9) :1849-1861.
  • 10Upadhyay D N, Yegnaraman V. Effect of thiourea and sub-stituted thioureas on copper underpotential deposition on gold[ J ]. Materials Chemistry and Physics, 2000,62 ( 3 ) : 247-253.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部