期刊文献+

环氧树脂/沸石纳米复合材料的制备及表征 被引量:7

Characterization and Preparation of Epoxy Resin/Zeolite Nanocomposite
下载PDF
导出
摘要 提出了一种用原位插入法制取环氧树脂 /沸石纳米复合材料的新方法 ,详细探讨了钠化、有机化、环氧树脂插入、固化及制备环氧树脂 /沸石纳米复合材料的条件 ,在实验的基础上确定了最佳条件 ,制成了纳米复合材料 ,并用XRD和TEM对其结构进行了表征 ,发现纳米复合材料的平均粒径在 5 0~ 6 0nm之间 ,同时力学性能有明显提高 ,可用于高性能的工程塑料和高品质的粘合剂 . This paper proposes a new method to synthesize the epoxy resin/zeolite nanocomposite. In this method, zeolite was previously treated with sodium nitrate, and organized with ceyltrimethyl ammonium bromide. Epoxy resin was interposed in the cavity of zeolite and polymerized in situ. Then, the polymer mixtures were solidified by pp' diaphenyl methane to prepare for nanocomposite. The synthesis condition such as mixing temperature, mixing time and concentrations are discussed extensively, and the epoxy resin/zeolite nanocomposite was characterized by XRD and TEM. This composite is found to be formed by the nanometer aggregated particles, ranging from 50 to 60 nm in diameter based on the analysis of the TEM image. The epoxy resin/zeolite nanocomposite exhibits dramatic increases in their mechanical properties, which can be used in engineering plastic and high quality adhesive.
出处 《地球科学(中国地质大学学报)》 EI CAS CSCD 北大核心 2002年第4期403-407,共5页 Earth Science-Journal of China University of Geosciences
关键词 纳米复合材料 沸石环氧树脂 插入 固化 nanocomposite zeolite epoxy resin interpose solidify.
  • 相关文献

参考文献5

二级参考文献25

共引文献392

同被引文献54

引证文献7

二级引证文献60

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部