期刊文献+

Nd_2O_3-LiF-NdF_3在TiB_2/TiC复相陶瓷上的润湿和界面行为研究 被引量:1

Wettability and Interfacial Behavior of Nd_2O_3-LiF-NdF_3 on TiB_2/TiC Ceramics
原文传递
导出
摘要 采用座滴法研究Nd2O3-LiF-NdF3在TiB2/TiC复相陶瓷上的润湿行为。Nd2O3-LiF-NdF3熔体在TiB2-TiC复相陶瓷上的润湿过程呈现出物理润湿和化学润湿双重特征,整个润湿过程在初期相当迅速,但当时间达到11 min后,接触角随时间的延长变化十分缓慢,三相平衡时的接触角为14.8°;润湿界面XRD分析表明,TiB2/TiC复相陶瓷与Nd2O3-LiF-NdF3熔体高温下不发生化学反应,TiB2的高温氧化是产生化学润湿的主要原因。 The wettability behavior of Nd2O3-LiF-NdF3on TiB2/TiC ceramics was investigated using a sessile drop method. The wettability of TiB2-TiC ceramics by NdF3-LiF-Nd2O3melt combined a physical and chemical wetting process,during which the wetting was fast at the early stage and then became slow when the wetting time was up to 11 min. The contact angle was 14. 8° when the equilibrium was reached. The XRD analysis of the wetting interface of TiB2/TiC ceramics showed that no reaction happened between the Nd2O3-LiF-NdF3melt and TiB2/TiC ceramics,and the chemical wetting was attributed to the oxidation of TiB2.
出处 《稀土》 EI CAS CSCD 北大核心 2014年第3期49-53,共5页 Chinese Rare Earths
基金 国家863计划项目资助(2011AA03A409) 内蒙古自治区自然科学基金项目资助(200607010712)
关键词 TIB2 TiC复相陶瓷 座滴法 接触角 润湿 TiB2/TiC multiphase ceramic sessile drop method contact angle wetting
  • 相关文献

参考文献13

  • 1Li Jie. Lv Xiaojun,l,ai Yanqiang,et al. Research progress in TiB2 wettable cathode for aluminum reduction [ J ]. Journal of Metal ,2008,60 (8) :32-37.
  • 2Wang Huihua,Sun Shuchen, Wang Deyong,et al. Charac- terization of the structure of TiB2/TiC composite via me- chanical alloying and subsequent pressureless sintering [J].Powder Technology,2012,217:340-346.
  • 3Xue Jilai,Chen Xing, Gao Yuanling,et al. Wettability of liquid aluminum on carbort/graphite/TiB2 composite cath- ode material [ J ]. The Minerals Metals & Materials Society ,2010,420:383-386.
  • 4孙康,刘明月.C/TiC和C/TiB2复合材料的研究[J].硬质合金,2001,(2):41-43.
  • 5李庆余,赖延清,李劼.应用新一代常温固化TiB2阴极涂层技术提高我国预焙铝电解槽寿命[J].轻金属,2004(10):34-37. 被引量:15
  • 6冯乃祥,戚喜全,彭建平.1.35kA TiB_2/C阴极泄流式铝电解槽电解实验[J].中国有色金属学报,2005,15(12):2047-2053. 被引量:10
  • 7王军,王春慧,涂赣峰,任雁秋,米兰.10kA底部阴极稀土熔盐电解槽热平衡计算[J].稀土,2008,29(5):61-63. 被引量:12
  • 8郭峰,李历坚.TiB_2基陶瓷材料的研发进展与展望[J].粉末冶金材料科学与工程,2009,14(5):285-289. 被引量:15
  • 9Torizuka S, Sato K, Nishio H. Effect of SiC on interfacial reaction and sintering mechanism of TiB2 [ J ]. Journal of the American Ceramic -iety, 1995,78 (6) : 1606-1610.
  • 10Bhaumik S K, Divakar C,Singh A K. Synthesis and sin- tering of TiB, and TiB2 - iC composite under high pressure[ J]. Materials Science and Engineering A, 2000, 279( 1 ) :275-281.

二级参考文献66

  • 1任永红,汪进宝,贺友多,刘中兴.稀土电解槽的电场计算与槽电压分析[J].包头钢铁学院学报,2003,22(4):313-317. 被引量:16
  • 2李庆余,赖延清,李劼.应用新一代常温固化TiB2阴极涂层技术提高我国预焙铝电解槽寿命[J].轻金属,2004(10):34-37. 被引量:15
  • 3别列耶夫AM.熔盐物理化学[M].冶金工业出版社,1963..
  • 4郭海涛,贾海军,谢兵,任永红,王佐成.3000A金属钕电解槽的能量平衡[J].江西冶金,2007,27(3):13-16. 被引量:4
  • 5COBB P C. Titanium carbide as a sintering agent for titanium boride[J]. Materials and Design, 1990, 11(3): 156-159.
  • 6BOXALL L, COOK A, HAYDEN W. TiB2 cathod material: application in conventional VSS cells[J]. Journal of Light Metals, 1984, 36(11): 35-37.
  • 7KANG E S, KIM C H. Improvements in mechanical properties of TiB2 by the dispersion of B4C particles[J]. Journal of Materials Science, 1990, 25(1): 580-584.
  • 8SIGL L S, SCHWETZ K A, DWORAK U. Continuous turning with TiB2 cermet: Preliminary cutting test[J]. International Journal of Refractory Metals & Hard Materials, 1994, 12(2): 95-99.
  • 9DAVIS T J, OGWU A A. Characterisation of composite of TiC+TiB2 bonded with nickel based binder alloy: mechanical and microstruetural properties[J]. Powder Metallurgy, 1995, 38(1): 39-44.
  • 10WATANABE T, YAMAMOTO H. Factors affecting the porosity and bending strength of Ti (CN)-TiB2 materials[J]. Journal of the American Ceramic Society, 2005, 71(4): 202-204.

共引文献65

同被引文献13

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部