期刊文献+

Influence of Structures on the Mechanical Properties of PET Biotextiles 被引量:1

Influence of Structures on the Mechanical Properties of PET Biotextiles
下载PDF
导出
摘要 Occurrence of vascular diseases is increasing and leads to rising demand for the STENT-GRAFT( SG). To ensure the SG function properly,the materials should have low blood permeability and good mechanical properties. So far, there have been few systematic studies on the relationship between textile structures and mechanical properties of the bio-textiles used in the SG. In this study, six types of biomedical PET fabrics with different yarn structures and fabric structures were designed and fabricated. All the SG materials could meet the requirement of thickness,except the sample of 30 d × 20 d with 2 /2 twill construction,which was thicker than 0. 12 mm. Bursting strength and water permeability( WP) of the six samples were also tested. Through the comparison of comprehensive performance,the PET fabric 30 d × 20 d /12 f with2 /2 twill construction with both good resistances to permeability and bursting strength, might have good prospect in applications of vascular engineering. Occurrence of vascular diseases is increasing and leads to rising demand for the STENT-GRAFT (SG). To ensure the SG function properly, the materials should have low blood permeability and good mechanical properties. So far, there have been few systematic studies on the relationship between textile structures and mechanical properties of the bio-textiles used in the SG. In this study, six types of biomedical PET fabrics with different yarn structures and fabric structures were designed and fabricated. All the SG materials could meet the reqnirement of thickness, except the sample of 30 d ×20 d with 2/2 twill construction, which was thicker than 0.12 mm. Bursting strength and water permeability (WP) of the six samples were also tested. Through the comparison of comprehensive performance, the PET fabric 30 d × 20 d/12 f with 2/2 twill construction with both good resistances to permeability and bursting strength, might have good prospect in applications of vascular engineering.
出处 《Journal of Donghua University(English Edition)》 EI CAS 2014年第2期106-108,共3页 东华大学学报(英文版)
基金 the Key Project of the National Nature Science Foundation of China(No.61134009) Program for Changjiang Scholars and Innovation Research Team in University from the Ministry of Education,China(No.IRT1220) Specialized Research Funds for Shanghai Leading Talents,Project of the Shanghai Committee of Science and Technology,China,(No.13JC1407500) the Fundamental Research Funds for the Central Universities,China(No.2232012A3-04)
关键词 endovascular prostheses textile structure water permeability bursting strength thickness endovascular prostheses textile structure water permeability bursting strength thickness
  • 相关文献

参考文献1

二级参考文献6

  • 1[1]How T V et al. Engineering Design of Vascular Prosthesis. Proc Instn Mech Engra, 1992(206): 61 ~ 69.
  • 2[2]King M W. Designing Fabrics for Blood Vessel Replacement. Canadian Textile Journal, 1991 (4): 24 ~ 30.
  • 3[3]Guidoin R.. Textile Arterial Prostheses: Is Water Permeability Equivalent to Porosity? J. Biomed. Mater. Res., 1987(21) :65~ 87.
  • 4[4]ISO7198. Cardiovascular Implants - Tubular Vascular Prostheses, 1998.
  • 5[5]Wang L. Contribution a l' etude du Vieillissement des Protheses Vasculaires Textiles. Doctral Thesis, University of Haute Alsace. France, 2001.
  • 6[6]Savvides C N et al. Numerical Analysis of the Flow Through a Corrugated Tube with Application to Arterial Prostheses. J Fluid Mech, 1984(138): 129~160.

共引文献27

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部