摘要
介绍了微小孔电火花加工过程中工作介质的选择、电极损耗的补偿、加工质量的控制分析,阐述了存在的问题以及未来的发展趋势。
出处
《机械制造》
2014年第7期101-103,共3页
Machinery
参考文献11
-
1Masuzawa T.There-Dimensional Micro Machining by Machine Tools [ J ] .Annuals of the CIRP, 1997,46 (2) :621-628.
-
2Kunieda M,Yoshi da M. Electrical Discharge Machining in Gas[J] .Annals of the CIRP, 1997 ,46(1 ) : 143 -146.
-
3王振龙,朱保国,田锡清.气体介质中深小孔电火花加工技术研究[J].航空学报,2007,28(2):460-463. 被引量:7
-
4郭谆钦,王承文.超声振动-气体介质电火花复合加工技术的研究[J].机床与液压,2012,40(10):28-29. 被引量:3
-
5苏树朋,张勤河,张建华,高清.超声辅助气中电火花铣削加工研究[J].中国机械工程,2008,19(18):2227-2230. 被引量:7
-
6张小燕,魏引焕.电火花加工中电极损耗分析与解决措施[J].机床与液压,2010,38(22):126-127. 被引量:10
-
7李勇.微细电加工应用技术研究[J].电加工与模具,2009(B04):32-37. 被引量:5
-
8王长法,顾琳,蒋毅,王丹,梁速,赵万生.微细电火花加工的电极补偿方法研究[J].电加工与模具,2009(3):27-30. 被引量:9
-
9邓容,吴品,裴景玉,郭常宁,胡德金.微细电火花加工损耗补偿的研究[J].电加工与模具,2007(4):20-23. 被引量:10
-
10Chang Y F, Chiu Z H.Electrode Wear-compensation of Electric Discharge Scanning Process Using a Robust Gap- control[ J ].Mechatronics,2004,14 (10) : 1121-1139.
二级参考文献36
-
1赵建社,徐家文,云乃彰,房景仕.异形型腔组合电加工数字化制造技术研究[J].航空学报,2006,27(1):157-160. 被引量:18
-
2徐明刚,张建华,张勤河,任升峰.超声振动改善气体介质电火花加工的机理研究[J].中国机械工程,2007,18(11):1261-1264. 被引量:7
-
3李勇,龚姗姗,陈旭鹏,等.阵列微细型孔的电化学加工工艺:中国,ZL200510073178.x[P].2005-11-23.
-
4周旭光.特种加工技术[M].西安:西安电子科技大学出版社,2008.
-
5Masuzawa T, et al. Wire electro-discharge grinding for micro-machining [ J ]. Annals of the CIRP, 1985,34 ( 1 ) : 431 - 434.
-
6Yu Z Y, Masuzawa T, Fujino M. Micro-EDM for three-dimensional cavitie3 - Development of uniform wear method[J]. Annals of the CIRP, 1998,47(1):169- 172.
-
7Kock M, Kirehner V, Schuster R. Electrochemical micromaehining with ultrashort voltage pulses - a versatile method with lithographical precision[J]. Electrochimica Acta, 2003,48:3213 - 3219.
-
8李勇,郭旻,李芳..精密微细孔电火花加工装置....中国,ZL00105639.5[P]....
-
9Tong H, Wang Y, Li Y. Vibration-assisted servo scanning 3D micro EDM [ J ]. Journal of Mieromeehanies and Mieroengineering, 2008,18(2) :501 - 508.
-
10Yu Z Y, Masuzawa T, Fujino M, Micro-EDM for three-dimensional cavities Development of uniform wear method[J]. Annals of the CIRP 1998,47(1): 169 - 172.
共引文献37
-
1徐盛林,杨俊杰,李三岗.薄壁橡胶制品的模具型腔和型芯的电火花套料加工的实验探讨[J].机床与液压,2008,36(12):16-18.
-
2石煜,李文卓,陈义保,郭忠.小波与分形论在电火花加工放电研究中的应用[J].电加工与模具,2009(1):13-16. 被引量:1
-
3王长法,顾琳,蒋毅,王丹,梁速,赵万生.微细电火花加工的电极补偿方法研究[J].电加工与模具,2009(3):27-30. 被引量:9
-
4李立青,郭艳玲,邓宇峰,郝继鹏,王海峰,何望.基于微小电极的气中电火花加工试验研究[J].世界科技研究与发展,2009,31(5):848-851.
-
5陈扣杰,单岩.电火花加工电极辅助设计与仿真系统的研究[J].电加工与模具,2010(2):9-11.
-
6王贺宾,郭钟宁,罗红平.微细电解加工技术研究现状与展望[J].组合机床与自动化加工技术,2011(4):108-112. 被引量:4
-
7张雷,王玉魁,耿雪松,王振龙.削边电极深小孔微细电火花间隙流场仿真研究[J].电加工与模具,2011(3):33-37. 被引量:4
-
8王建春.超声加工技术研究现状及展望[J].机械工程师,2012(4):6-11. 被引量:13
-
9金方进,裴景玉.基于圆锥形端面电极的电火花铣削加工定长补偿方法研究[J].电加工与模具,2012(2):21-24. 被引量:6
-
10蔡兰蓉,李洋,李敏,杨慧.基于绿色制造的雾中放电修整金刚石砂轮实验研究[J].天津职业技术师范大学学报,2012,22(3):9-12.
同被引文献8
-
1何英,朱红钢.简述电加工技术在大飞机制造中的应用[J].航空制造技术,2011,0(13):104-106. 被引量:4
-
2周武平,吕大铭,唐安清,凌贤野.电火花加工用钨铜电极制造工艺研究[J].机械工程材料,1996,20(2):30-32. 被引量:11
-
3陈向荣,何春生,何孝美.热处理工艺改进在模具生产中的应用[J].热加工工艺,2008,37(12):113-114. 被引量:2
-
4张勇斌,吉方,刘广民,张连新,吴祉群.微细电火花加工关键技术及工艺研究[J].组合机床与自动化加工技术,2011(2):96-99. 被引量:3
-
5崔向群,许丽华,魏国栋.电火花加工放电介质的研究[J].机床与液压,2012,40(8):68-70. 被引量:1
-
6刘建勇,杨大勇,郭妍,蔡延华,王浩.精密微细倒锥孔电火花加工机床机械系统的研究[J].电加工与模具,2013(5):54-58. 被引量:4
-
7麻桂红.特殊零部件电火花加工方法的探索[J].机械制造,2016,54(4):41-43. 被引量:1
-
8吕战竹,刘顺福,赵福令.铜/钢爆炸复合材料在电火花加工中的应用[J].电加工与模具,2002(5):9-11. 被引量:7
-
1王长法,顾琳,蒋毅,王丹,梁速,赵万生.微细电火花加工的电极补偿方法研究[J].电加工与模具,2009(3):27-30. 被引量:9
-
2孙仲明,陈健,陆国栋.微细电火花加工的电极补偿方法综述[J].电加工与模具,2013(1):1-5. 被引量:1
-
3熊毅,孙育竹.电火花成型电极补偿技术研究的现状与趋势[J].制造技术与机床,2015(11):46-51. 被引量:2
-
4嵇祎吉,单岩.电火花成型辅助设计与加工仿真系统的开发[J].模具制造,2008,8(6):67-69.
-
5苏益,裴景玉,胡德金.电火花加工机床的开放式CNC系统设计[J].电加工与模具,2004(2):19-21. 被引量:1
-
6罗华,李翔龙,国蓉.电火花铣削中电极损耗及补偿的几何描述方法[J].机床与液压,2005,33(2):25-26. 被引量:2
-
7吴鑫,李勇,崔晶,鲁培.三维微细电火花加工系统设计及实验研究[J].电加工与模具,2005(4):5-9. 被引量:12
-
8苏树朋,张勤河,张建华,高清,闫鹏.超声辅助气中放电铣削加工CAD/CAM[J].电加工与模具,2008(1):36-39.
-
9谢龙汉,单岩.精密模具EDM专用补偿软件系统的开发[J].电加工与模具,2004(B05):42-44. 被引量:1
-
10李建国.微细数控电火花仿铣加工电极的在线检测[J].中国工程物理研究院科技年报,2006(1):267-267.