期刊文献+

Resistive Switching Behavior in Amorphous Aluminum Oxide Film Grown by Chemical Vapor Deposition

Resistive Switching Behavior in Amorphous Aluminum Oxide Film Grown by Chemical Vapor Deposition
下载PDF
导出
摘要 The repeatable bipolar resistive switching phenomenon is observed in amorphous Al2O3 prepared by metalorganic chemical vapor deposition on ITO glass, with ITO as the bottom electrode and Ag as the top electrode. The crystal structure, morphology, composition and optical properties of Al2O3 thin films are investigated by x-ray diffraction, x-ray photoelectron spectroscopy, atomic force microscopy and ultraviolet-visible-infrared spectroscopy, respectively. The electronic character of Ag/Al2O3/ITO structure is tested by an Agilent B1500A. The device shows a typical bipolar resistive switching behavior under the dc voltage sweep mode at room temperature. The variation ratio between HRS and LRS is larger than nearly three orders of magnitude, which indicates the good potential of this structure in future resistive random access memory (ReRAM) applications. Based on the conductive filament model, the high electric field is considered the main reason for the resistive switching according to our measurements. The repeatable bipolar resistive switching phenomenon is observed in amorphous Al2O3 prepared by metalorganic chemical vapor deposition on ITO glass, with ITO as the bottom electrode and Ag as the top electrode. The crystal structure, morphology, composition and optical properties of Al2O3 thin films are investigated by x-ray diffraction, x-ray photoelectron spectroscopy, atomic force microscopy and ultraviolet-visible-infrared spectroscopy, respectively. The electronic character of Ag/Al2O3/ITO structure is tested by an Agilent B1500A. The device shows a typical bipolar resistive switching behavior under the dc voltage sweep mode at room temperature. The variation ratio between HRS and LRS is larger than nearly three orders of magnitude, which indicates the good potential of this structure in future resistive random access memory (ReRAM) applications. Based on the conductive filament model, the high electric field is considered the main reason for the resistive switching according to our measurements.
出处 《Chinese Physics Letters》 SCIE CAS CSCD 2014年第7期197-200,共4页 中国物理快报(英文版)
基金 Supported by the National Natural Science Foundation of China under Grant Nos 61107028 and 61131004, and the Fundamental Research Funds for the Central Universities under Grant No DUT12JB11.
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部