摘要
利用数值模拟法对缩尺AP1000空槽定子铁芯与定子屏蔽构件的装配过程进行了研究。首先提出了5种不同内压加载路径的装配过程,通过分析成形能力确定了较为合适的加载路径;接着在此加载路径基础上分析了成形能力与内压力关系随初始间隙变化的规律;最后分析了不同摩擦因数对装配过程的影响。研究表明:数值模拟法有助于装配方案的确定以及装配效果的预测;装配中存在一定的摩擦可获得到较好的装配效果。
Numerical simulations were conducted to study the hydro forming assembly of the AP1000 stator components. Firstly,five different loading paths were suggested to study the assembly effects. A suitable loading path was obtained based on the analyses of the formability. Then the relationships between the bulge ability and the internal pressure with the change of the initial clearance were analyzed. Finally, the effects of the coefficient of friction on the assembly process were examined. The results show that the simulation method benefits the determination of assembly process and the prediction of assembly effects,and a better assembly result can be obtained by a proper coefficient of friction.
出处
《中国机械工程》
EI
CAS
CSCD
北大核心
2014年第14期1967-1972,共6页
China Mechanical Engineering
基金
国家重点基础研究发展计划(973计划)资助项目(2009CB724307)
关键词
定子组件装配
液压成形
载荷路径
胀形量
液压力
摩擦因数
stator component assembly
hydroforming
loading path
bulging amount
liquid pressure
coefficient of friction
