摘要
针对胜利油田边底水超稠油油藏水侵后含水率增加、产油量降低、大量剩余油未能采出等问题,以郑411区块1砂体为例,提出通过在油水边界处的水平井注入化学堵剂建立封堵隔板以遏制边底水入侵的措施。通过油藏数值模拟研究,优化了冻胶的注入层位、注入量以及注入方式。模拟封堵结果表明,超稠油油藏水平井冻胶控水稳油的效果明显,区块整体含水下降,产油上升,调堵效果显著。
In view of the problems of increased water cut,declined oil production,and a large number of unproduced remaining oil after water invasion,by taking sandbody-1 of Zheng411 block as an example,the injection of chemical plugging agent in the oil-water boundary of horizontal well was put forward so as to build block partition measures to curb side bottom water invasion.Through reservoir numerical simulation,the injection layer,injection volume and injection mode of gel were optimized.Simulation plugging results show the water control and stabilizing oil effect is obvious,with decreased overall water cut,increased oil production and remarkable plugging effect.
出处
《石油地质与工程》
CAS
2014年第3期71-73,148,共3页
Petroleum Geology and Engineering
基金
国家科技重大专项大型油气田及煤层气开发专题"复杂油气田地质与提高采收率"(2011ZX05009)
国家自然科学基金"超临界二氧化碳在非常规油气藏中应用的基础研究"(No.51034007)
关键词
边底水稠油
控水稳油
数值模拟
胜利油田
郑411区块
Shengli oilfield
Zheng 411 block
edge-bottom water of heavy oil
water control and stabilizing oil
numerical simulation