期刊文献+

基于弓网电接触界面电阻模型的受流质量研究 被引量:4

Research on the Quality of Current-Collecting Based on the Electrical Contact Interface Resistance Model of Pantograph-Catenary
下载PDF
导出
摘要 接触电阻是衡量弓网受流质量可靠性的重要指标,在机车运行过程中,希望弓网接触表面具有较小而稳定的接触电阻.依据弓网电接触界面的微观电阻特性,详细分析了影响弓网受流质量的接触面积及接触斑点数,建立了量化电接触界面电阻的表面特征统计模型.试验结果表明,该分析方法是可行且有效的. Contact resistance is an important factor to judge the reliability of current-collecting quality of pantograph-catenary.And it is expected to get smaller and stable contact resistance in the process of locomotive run.Based on micro resistance characteristics of pantograph-catenary e-lectrical contact interface,the effect of contact area and contact number of spots on the quality of pantograph-catenary current-collecting are analyzed in detail,and a statistical model of surface characteristics is established to quantify the electrical contact interface resistance.The test results show that the analytical method is feasible and effective.
出处 《兰州交通大学学报》 CAS 2014年第3期11-15,共5页 Journal of Lanzhou Jiaotong University
关键词 弓网受流质量 滑动电接触 接触界面电阻 表面特征统计模型 current-collecting quality of pantograph-catenary sliding electrical contact contact interface resistance statistical model of surface characteristic
  • 相关文献

参考文献9

  • 1吴积钦.受电弓与接触网系统[M]成都:西南交通大学出版社,2010.
  • 2Roark R J;Yang W C;Budynas R G;岳珠峰;高行山;王峰会.罗氏应力应变公式手册[M]北京:科学出版社,20058.
  • 3郭凤仪,马同立,陈忠华,赵汝彬,姜国强,任志玲.不同载流条件下滑动电接触特性[J].电工技术学报,2009,24(12):18-23. 被引量:57
  • 4Holm R. Electrical contacts[M].New York:Springer-Verlag,1979.
  • 5布朗诺维克;康奇兹;米西金;许良军;芦娜;林雪燕.电接触理论、应用与技术[M]北京:机械工业出版社,2010.
  • 6徐国政;张节荣;钱家骊.高压断路器原理和应用[M]北京:清华大学出版社,2000.
  • 7郭凤仪;陈忠华.电接触理论及其应用技术[M]北京:中国电力出版社,2010.
  • 8许军,李坤.电接触的接触电阻研究[J].电工材料,2011(1):10-13. 被引量:97
  • 9Kogut L,Komvopoulos K. Electrical contact resistance theory for conductive rough surfaces[J].Journal of Applied Physics,2008,(05):3153-3162.

二级参考文献19

  • 1高飞,杜素强,符蓉,宋宝韫.不同速度下石墨含量对铜基摩擦材料性能的影响[J].矿冶工程,2005,25(4):80-82. 被引量:18
  • 2Filippakou M P, Karagiannopoulos C G, Agoris D P Electrical contact overheating under short-circuit currents[J]. Electric Power Systems Research, 2001, 16(8): 141-147.
  • 3Jia S G, Liu P, Ren F Z. Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding[J]. Materials Science and Engineering, 2005, 398: 262-268.
  • 4Kharin S N, Alma Ata, Mikhailov V V. Dynamic and thermal physical processes in low-current sliding contacts[J]. International Applied Mechanics, 2001, 44(12): 301-305.
  • 5Hiroki Nagasawa, Koiji Kato. Wear mechanism of copper alloy wire sliding against current collector materials[J]. Wear, 1998, 21(6): 179-183.
  • 6Seering W, Vesely C, Armbruster K. Experimental and analytical study of pantograph dynamics[J]. IEEE Trans. on Components, Hybrids, and Manufacturing Techonology, 1991, 15(2): 270-275.
  • 7Zhai H X, Huang Z Y. Instabilities of sliding friction governed by asperity interference mechanisms[J]. Wear, 2004, 25(7): 414-422.
  • 8Park Tong Jin, Han Chang Soo, Jang Jin Hee. Dynamic sensitivity analysis for the pantograph of a high-speed rail vehicle[J]. Academic Press, 2003, 26(6): 235-260.
  • 9Shunichi Kubo, Koji Kato. Effect of arc discharge on wear rate of Cu impregnated carbon strip in unduplicated sliding against Cu trolley under electric current[J]. Wear, 1998, 21(6): 172-178.
  • 10Malucci R D.High Frequency Considerations for MultiPoint Contact Interfaces[J]. Proceeding of the Forty-Fifth IEEE Holm Conference on Electrical Contacts,2001.

共引文献152

同被引文献81

引证文献4

二级引证文献62

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部