Preparation and Characterization of Copper Borates as Lubricant Additives
Preparation and Characterization of Copper Borates as Lubricant Additives
出处
《材料科学与工程（中英文B版）》
2014年第4期95-108,共14页
Journal of Materials Science and Engineering B
参考文献19
-
1S.Z. Hu, r.x. Dong, G.X. Chen, F. Lou, Preparation of nanometer copper borate with supercritical carbon dioxide drying, Powder Technology 102 (1999) 171.
-
2Y. Zheng, Z. Wang, Y. Tian, Y. Ou, S. Li, D. An, et al., Synthesis and performance of ID and 2D Copper borate nano/microstructures with different morphologies, Colloid and Surfaces A: Physicochem. and Eng. Aspects. 349 (2009) 156.
-
3H.L. Yu, Y. Xu, P.J. Shi, B.S. Xu, X.L. Wang, Q. Liu, Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant, Trans. Nonferrous Met. Soc. China 18 (2008) 636.
-
4E.M. Shvartz, R.G. Belousova, Synthesis of Zinc and copper borates in a single technological cycle, Russian Journal of Applied Chemistry 79 (2005) 893.
-
5E.M. Shvartz, R.G. Belousova, Formation of tricuprotetraborate 3CuO?2B203?6H20 in aqueous solutions, Russian Journal of Applied Chemistry 79 (2006) 672.
-
6S.C. Neumair, R. Kaindl, R.D. Hoffrnman, H. Huppertz, The New High-Pressure Borate Hydrate CU3B6012.H20, Solid State Sciences 14 (2012) 229.
-
7E.J. Bushong, C.H. Yoder, The synthesis and characterization of rouartite, a copper hydroxy nitrate, An Integrated First-Year Laboratory Project Journal of Chemical Education 86 (2009) 80-81.
-
8J.M. Aguirre, A Gutierrez, O. Giraldo, Simple route for the synthesis of copper hydroxy salts, J. Braz. Chern. Soc. 22 (2011) 546.
-
9E. Kandare, G. Chigwada, D. Wang, C.A Wilkie, J.M. Hossenlopp, Nanostructured layered copper hydroxy dodecyl sulfate: A potential fire retardant for poly(vinylester) (PVE) polm, Deg. And Stab. 91 (2006) 1781.
-
10T. Biswick, W. Jones, A Pacula, E. Serwicka, Synthesis characterization and anion exchange properties of copper, magnesium, zinc and nickel hydroxy nitrates, Journal of Solid State Chemistry 179 (2006) 49.
-
1于晓雪,廖克俭,王洪国.原油电脱盐工艺的影响因素[J].当代化工,2013,42(1):116-118. 被引量：6
-
2李丹东,刘彤,贾欢欢,西仁古丽.加帕尔,张连梓,于海,赵荣祥,石薇薇.钨酸铜催化氧化脱除模拟油中的硫化物[J].辽宁石油化工大学学报,2015,35(2):12-16. 被引量：2
-
3乔保林,周旭煌,李中原,唐锡元,杨朝光,王志鹏,乔宏宾,熊玉宾.高矿化度条件下示踪剂NH_4NO_3浓度的测定[J].油田化学,2001,18(1):87-89. 被引量：1
-
4涂文利,张萍,王红艳.酚二磺酸法测定硝酸根离子的研究[J].油田化学,1997,14(3):283-285. 被引量：7
-
5郭磊,孙铁,张丹,张丽,王强.FCC汽油脱硫小试装置的设计[J].辽宁石油化工大学学报,2014,34(4):55-57. 被引量：2
-
6朱向哲,吕柏林.涡轮搅拌桨反应器混合过程的数值计算[J].石油化工设备技术,2006,27(4):27-29. 被引量：2
-
7于晓雪,王洪国,廖克俭.原油电破乳工艺条件正交实验分析[J].应用化工,2013,42(2):383-384. 被引量：1
-
8陈明燕,刘政,聂崇斌,梁志勇,刘宇程.重质原油电脱盐影响因素分析及操作条件优化研究[J].石油与天然气化工,2011,40(6):578-580. 被引量：17
-
9卢新甫.应用破乳剂实施井筒化学降粘[J].胜利油田职工大学学报,2009(4):24-25. 被引量：1
-
10王满学,王奎,刘雪锋,张建利.用油田回注污水配制水基压裂液的研究与应用[J].石油钻探技术,2006,34(6):67-70. 被引量：19
