摘要
随着便携式电子系统的广泛使用,同一系统往往需要不同等级的供电电源电压。单电感双输出(SIDO)型Buck拓扑的提出,使得应用于便携式设备中的多路输出电源效率得到了提高。这里采用差模电压结合单周期控制(OCC)实现了Buck变换器SIDO。设计了系统控制模型,并通过实验验证了此处控制策略的可行性。
With the widely use of portable electronic system, the same system requires different levels of supply voltage.A single-inductor dual-output (SIDO) Buck topology improves the efficiency of multiple-output power supply applied into the portable electronic system.Differential-mode voltage combined with one-cycle control(OCC) is used in SIDO Buck converter here.The system control model 's designed, and the experiment verifies the feasibility of the new control strategy.
出处
《电力电子技术》
CSCD
北大核心
2014年第8期66-67,共2页
Power Electronics
基金
国家级大学生创新创业设计训练计划项目(201210361061)~~
关键词
变换器
单电感双输出
便携式电子系统
converter
single-inductor dual-output
portable electronic system