摘要
在镁合金中复合添加了合金元素V和Sc,并进行了显微组织、物相组成和阻尼性能的测试与分析。结果表明:与未添加合金元素V和Sc的镁合金相比,合金元素V和Sc的添加可提高合金的阻尼性能;在0.6Hz相同频率下,20℃时阻尼性能增加149.52%,在20℃的相同温度下,0.2 Hz时的阻尼性能增加66.27%,1Hz时的阻尼性能增加了673.53%。
Magnesium alloys were prepared with the composite addition of V and Sc, moreover, the microstructure, phase composition and damping capacity of the alloy were tested. The results show that compared with the magnesium alloy without alloying elements of V and Sc, the composite additive alloying elements of V and Sc can markedly improve the damping capacity of the alloy, and make damping capacity increase by 149.52% at 20℃ when the frequency is the same at 0.6 Hz, and when the temperature is the same at 20 ℃, it could make damping capacity increase by 66.27% and 673.53% at the frequency of 0.2Hz and 1Hz, respectively.
出处
《热加工工艺》
CSCD
北大核心
2014年第14期47-49,共3页
Hot Working Technology
基金
国家高技术研究发展计划(863计划)(2012AA040603)
重庆市重大专项(cstc2011ggC70001)
关键词
镁合金
阻尼性能
微合金化
复合添加
magnesium alloy
damping capacity
tensile property
microalloying
composite addition