期刊文献+

核主泵空化过渡过程水动力特性研究 被引量:7

Analysis on Transient Hydrodynamic Characteristics of Cavitation Process for Reactor Coolant Pump
下载PDF
导出
摘要 采用流场分析软件ANSYS CFX对核主泵在不同空化工况下的水动力特性进行数值模拟分析,利用Morlet小波变换和快速傅里叶变换对相应数据进行处理分析。结果表明:气体含量随压力的降低或时间的增加呈现出指数变化规律。在空化初生工况,核主泵扬程脉动频率以低频为主,叶轮流道内的压力脉动的主频仍以转频为主,而空化产生的压力脉动对主频的影响不明显。随着空化的发展,空化所诱发的压力脉动对主频、次主频及脉动幅值的影响越来越大,其扬程脉动频率以低频脉动为主。空化严重工况时,扬程脉动频率以无规律变化的脉动高频为主,同时包含近乎规律变化的脉动低频。 T he reactor coolant pump hydrodynamic characteristics at different cavitation conditions were studied by using flow field analysis software ANSYS CFX ,and the cor-responding data were processed and analyzed by using Morlet wavelet transform and fast Fourier transform .The results show that gas content presents the law of exponential function with the pressure reduction or time increase . In the cavitation primary condition ,the pulsation frequency of head for the reactor coolant pump is mainly low frequency ,and the main frequency of pressure pulsation is still rotation frequency w hile the effect of the pressure pulsation caused by cavitation on main frequency is not obvi-ous .With the development of cavitation ,the pressure fluctuation induced by cavitation becomes more serious especially for the main frequency ,secondary frequency and pulsa-ting amplitude w hile the head pulsation frequency is given priority to low frequency pulse .Under serious cavitation condition ,the head pulsation frequency is given priority to irregular changes of pulse high frequency ,and also contains almost regular changes of low frequency .
出处 《原子能科学技术》 EI CAS CSCD 北大核心 2014年第8期1421-1427,共7页 Atomic Energy Science and Technology
基金 国家科技支撑计划资助项目(2011BAF14B04) 国家自然科学基金资助项目(51379091) 江苏省自然科学基金科技项目资助(BK2011504 BK20130516) 国家博士后基金资助项目(2014M551511) 江苏大学高级人才启动基金资助项目(13JDG083) 江苏高校优势学科建设工程资助项目(PAPD)
关键词 核主泵 空化 数值模拟 水动力特性 reactor coolant pump cavitation numerical simulation hydrodynamic characteristics
  • 相关文献

参考文献11

  • 1王秀礼,袁寿其,朱荣生,付强,俞志君.离心泵汽蚀非稳定流动特性数值模拟[J].农业机械学报,2012,43(3):67-72. 被引量:27
  • 2王秀礼,姜大连,俞志君,戴露.船用离心泵汽蚀性能数值模拟与试验研究[J].热能动力工程,2011,26(5):588-592. 被引量:8
  • 3王秀礼,袁寿其,朱荣生,俞志君,庄卫将.长短叶片离心泵汽蚀性能数值模拟分析及实验研究[J].中国机械工程,2012,23(10):1154-1157. 被引量:20
  • 4唐飞,李家文,陈晖,李向阳,宣统.采用环形入口壳体的诱导轮汽蚀性能研究[J].机械工程学报,2011,47(4):171-176. 被引量:13
  • 5COUTIER D O, MOREL P, FORTE S, et al Numerical simulation of turbo-pump inducer cavi tating hehaviorCJ-. International Journal of Rota ting Machinery, 2005(2): 135-142.
  • 6KIRIS C C, KWAK D, CHAN W, et al. High- fidelity simulations of unsteady flow through tur- bo pumps and flow liners[J]. Computers & Fluids, 2008, 37(5): 536-546.
  • 7COUTIER-DELGOSHA O, FORTES-PATELLA R, REBOUD J L, et al. Experimental and numerical studies in a centrifugal pump with two- dimensional curved blades in cavitating condition [J]. Journal of Fluids Engineering, 2003, 125 (6) : 970-978.
  • 8CUDINA M. Detection of cavitation phenomenon in a centrifugal pump using audible sound[J]. Mechanical Systems and Signal Processing, 2003, 17(6): 1 335-1 347.
  • 9CDINA M. Detection of cavitation phenomenon in a centrifugal pump using audible sound[J]. Mechanical Systems and Signal Processing, 2003, 17 (6): 1 335-1 342.
  • 10张玉.压水堆核主泵流场数值模拟和空化分析[D].杭州:浙江大学,2011.

二级参考文献33

共引文献61

同被引文献103

引证文献7

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部