摘要
针对聚氨酯泡沫微生物固定化载体的序批式生物膜反应器(SBBR),通过平行对比实验,考察生物脱氮过程中DO、碱度、温度、 C/N等因素对实际腈纶废水的处理效果及影响,结果表明:在进水pH=8, DO在2-4 mg/L,投加碳酸氢钠0.4 g/L,温度为32℃, HRT为48 h的条件下, COD去除率可达到65%以上,氨氮去除率达99%以上。
The effect of operation parameters such as aeration rate , alkalinity, temperature, and C/N ratio, in the process of biological nitrogen removal on acrylic fiber wastewater was studied , using polyurethane foam in Sequencing Batch Biofilm Reactor ( SBBR ) by contrast parallel experiments.The experimental results demonstrated that when DO was 2~4 mg/L, the dosage of sodium bicarbonate was 0.4 g/L, the temperature was 32℃, HRT was 48 h, the removal rate of COD was higher than 65%, and NH3 -N removal rate was higher than 99%.
出处
《广州化工》
CAS
2014年第16期62-64,69,共4页
GuangZhou Chemical Industry
基金
松花江石化行业有毒有机物全过程控制关键技术与设备(2012ZX07201-005)
关键词
腈纶废水
生化处理
影响因素
acrylic fiber wastewater
biological treatment
influence factors