摘要
利用自组装膜技术在石英片表面构建了多肽自组装膜。考察了组装液浓度和组装时间对多肽自组装膜组装效果的影响,并用紫外可见吸收光谱仪和扫描电镜对该膜进行了表征。研究结果表明,当γ-氨基丙基三乙氧基硅烷水溶液浓度为1%(V/V),组装时间为3 h;金纳米浓度为2.4×10-4 mol/L,组装时间为12 h;多肽浓度为1×10-4 mol/L,组装时间为12 h时,组装效果最好。基于凝血酶可特异性酶切多肽中精氨酸和甘氨酸之间的肽键,建立了一种测定微量凝血酶的新方法,方法的线性响应范围为2.8×10-12~9.9×10-10 mol/L,检出限为1.4×10-12 mol/L。此膜用于血清样品中凝血酶的测定,回收率为91.6%~107.6%。
Peptide self-assembled multilayers ( SAMs ) was coated onto the quartz surface. The assembly conditions, such as the assembly agent concentration and assembly time, were examined. The SAMs was characterized via UV-vis absorption spectrometry and scanning electron microscope. Our results showed that the optimal concentration and assembly time for the 3-aminopropyl-triethoxysilane aqueous were 1% ( V/V ) and 3 h respectively, and those of gold nanoparticles were 2. 4 × 10-4 mol/L and 12 h, respectively, while those of peptide solution were 1 × 10-4 mol/L and 12 h, respectively. A new sensitive method, based on the theory that peptide could be cleaved at the site of Arg-Gly by thrombin, was established to detect thrombin. In addition, a good linear relationship was obtained in the range from 2. 8×10-12 mol/L to 9. 9×10-10 mol/L, and the detection limit was 1. 4×10-12 mol/L. The peptide self-assembled multilayers were also used in the analysis of blood serum samples, and the recovery rate was within the range from 91. 6% to 107. 6%.
出处
《分析化学》
SCIE
EI
CAS
CSCD
北大核心
2014年第7期1044-1048,共5页
Chinese Journal of Analytical Chemistry
基金
国家自然科学基金(Nos.21275059
21175049)
福建省自然科学基金(Nos.2012J01044
2011J01049)
国务院侨务科研基金(No.11QZR12)
中央高校基本科研业务费专项资金(Nos.JB-2R1118
JB-ZR1215)资助~~
关键词
多肽
自组装膜
凝血酶
荧光
金纳米
Peptide Self-assembled multilayer Thrombin Fluorescence Gold nanoparticle