期刊文献+

用于相位恢复和滤波的光折变材料光学特性 被引量:3

Optical properties of organic photorefractive polymers for phase retrieval and filtering
下载PDF
导出
摘要 采用后重氮偶合法,合成了一种新型含咔唑类聚磷腈有机光折变材料。采用氢谱核磁共振法,红外光谱法,紫外-可见吸收光谱法,热重法和差示扫描量热法对该聚合物进行表征和分析,结果表明,该聚合物具有良好的热稳定性,在230℃开始分解,450℃时基本分解完全。UV-Vis表明波长在360nm与570nm之间的宽的吸收带是由于共轭长度的增加产生的,因此可以调整参加偶合反应的重氮盐比例,来控制偶氮生色团功能组分的接入含量。在未使用外加电场及事先极化的条件下对聚合物进行了二波耦合与四波混频实验,证明了聚合物的光折变特性。得到聚合物P-2和P-3的二波耦合增益系数分别为38cm-1和53.6cm-1,聚合物P-2和P-3的四波混频衍射效率分别为2.7%和8.1%。 New polyphosphazene organic photorefractive materials with carbazole groups were synthesized by diazo-coupling reaction.They were characterized by 1 H Nuclear magnetic resonance,infrared spectrum,Ultra-violet-visible,thermogravimetry and differential scanning calorimetry.The result showed that polymers had good heating stability.They started to decompose at230℃and decomposed completely at 450℃.UV-Vis indicated that the broad absorption peak ranging from 360 to 570nm was derived from the increase in the conjugation length.Hence we can adjust the ratio of diazonium salt in the coupling reaction to control the access content of azo chromophore functional component.The photorefractive effects were investigated without electric field and polarization by two-beam coupling(2BC)and degenerated four-wave mixing(DFWM).The coupling coefficients of polymers P-2and P-3are measured to be about 38cm-1and 53.6cm-1 respectively and the diffraction efficiencies of polymers P-2and P-3are measured to be about 2.7%and 8.1%respectively.
出处 《强激光与粒子束》 EI CAS CSCD 北大核心 2014年第9期205-209,共5页 High Power Laser and Particle Beams
基金 中国工程物理研究院激光聚变研究中心创新基金资助项目(CX08201205) 中国工程物理研究院科技发展基金项目(2013A0302016)
关键词 后重氮偶合 聚磷腈 有机光折变材料 二波耦合 四波混频 diazo-coupling polyphosphazene organic photorefractive materials two-beam coupling four-wave mix-ing
  • 相关文献

参考文献13

  • 1GaoH Y,ZhouZX,JiangY Y.Holographicimagestorageandmultiplehologramstorageinaplanarmethylreddopedliquidcrystalfilm[J].Applied Opies,2008,47(13):2437-2442.
  • 2BlancheP A,BablumianA,Voorakaranam R,etal.Holographicthreedimensionaltelepresenceusinglargeareaphotorefractivepolymer[J].Nature,2010,468(7320):80-83.
  • 3SalvadorM,PrauznerJ,K-berS,etal.Threedimensionalholographicimagingoflivingtissueusingahighlysensitivephotorefractivepoly-merdevice[J].Opsics Express,2009,17(14):11834-11849.
  • 4BittnerR,MeerholzK,SteckmanG,etal.Darkdecayofhologramsinphotorefractivepolymers[J].Applied Physics Letters,2002,81(2):211-213.
  • 5GoonesekeraA,WrightD,MoernerW E.Imageamplificationandnoveltyfilteringwithaphotorefractivepolymer[J].Applied Physics Letters,2000,76(23):3358-3360.
  • 6UnnikrishnanG,JosephJ,SinghK.Opticalencryptionsystemthatusesphaseconjugationinaphotorefractivecrystal[J].Applied Physics Letters,1998,37(35):8181-8186.
  • 7张洪涛,尹福昌.一种波前畸变补偿方法的理论推导与实验分析[J].兵工学报,2005,26(1):30-36. 被引量:1
  • 8梁利岩,张静娴,梅群波,吕满庚.含咔唑基聚合物的合成、发光性能及应用[J].精细化工,2007,24(8):743-746. 被引量:10
  • 9石军,姜治伟,曹少魁,吕新广.后重氮偶合法制备含硝基偶氮苯咔唑类聚合物[J].应用化学,2003,20(8):727-731. 被引量:6
  • 10刘朋军,张连华.聚磷腈功能材料研究进展[J].化学研究与应用,2001,13(1):33-38. 被引量:15

二级参考文献46

共引文献28

同被引文献22

  • 1丁旭丽,李清山,孔祥和.Effect of nitrogen pressure on optical properties and microstructure of diamond-like carbon films grown by pulsed laser deposition[J].Optoelectronics Letters,2009,5(2):117-119. 被引量:2
  • 2徐均琪,苏俊宏,谢松林,梁海锋.不同技术制备DLC膜的激光损伤特性研究[J].真空科学与技术学报,2007,27(3):181-184. 被引量:9
  • 3Wu Shenjiang, Shi Wei, Su Junhong. Using an external electric field to reduce laser damage of DLC films [J]. International Journal of Ma terials and Product Technology, 2012, 45(1/4) .- 74 82.
  • 4Mori T, Fujiwara M, Manory R R, et al. Hf()2 thin films prepared by ion beam assisted deposition[j~. Surfaceand Coatings Technology, 2003, 169/170(22) : 528 531.
  • 5Skoric B, Kaka D, Bibie N, et al. Microstructural studies of TiN coatings prepared by PVD and IBAD[J]. Sur3~ace Science, 2004, 566/568: 40-44.
  • 6Takanori Mori, Makoto Fu~iwara. Study on HfO2 film prepared by ion-assisted deposition using a gridless end hall ion source[J]. Thin Sol id Film, 1999, 350(1/2): 203-208.
  • 7Cheng C L, Chia C T, Chiu C C, et al. Hydrogen effects on the post production modification of diamond-like carbon produced by pulsed laser deposition[J]. Diamond and Related Materials, 2001,10:970 975.
  • 8Yang S H, Kong H, Lee K R, et al. Effect of environment on the tribological behavior of Si-neorporated diamond-like carbon films[J] Wear, 2002, 252: 70-79.
  • 9Druz B, Zaritskiy I, Hoehn J, et al. Direct ion beam deposition of hard diamond-like films from RF inductively coupled plasma soureeEJ] Diamond and Related Materials, 2001, 10 : 931-936.
  • 10Targove J D, Macleod H A. Verification of momentum transfer as the dominant densifying mechanism in ion-assisted deposition[J]. Appl Opt, 1988, 27(18): 3779-3781.

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部