摘要
含金属纤维织物染整时,应加强坯布检验,做到专坯专用,缝头要平整、布边整齐;烧毛采用一正一反,车速在100m/min以上;拉幅温度150~180℃,车速30.35m/min,超喂1.5%左右,时间30~45s;前处理采用8~12g/L生物酶退浆,冷轧堆练漂,淡碱丝光;采用亲水性有机硅柔软剂40-50g/L进行柔软整理。
According to the characteristics of metal fiber fabric, the reasonable dyeing and printing process is determined. That is, carefuJ greige cloth inspection, singeing at the speed of above 100 m/min, stentering at 150- 180 ℃ for 30 -45 s at the speed of 30- 35 m/min with over feeding about 1.5%, desizing with 8- 12 g/L enzyme, cold pad-batch scouring and bleaching, weak alkali mercerization, softening finish with hydrophilic silicone softener 40- 50 g/L. The treated fabrics feature stable quality and meet the reauirements of end-use.
出处
《印染》
北大核心
2014年第17期27-28,共2页
China Dyeing and Finishing
关键词
混纺交织物
染整
金属纤维
blended fabric
dyeing and finishing
metal fiber