期刊文献+

GH4133B合金中η相对力学性能的影响 被引量:2

Effects ofηPhase on Mechanical Properties of GH4133BAlloy
原文传递
导出
摘要 采用光学显微镜、扫描电镜、电子探针等手段对GH4133B合金中η相对力学性能的影响进行了研究。结果表明:GH4133B合金中η相在750-1 000℃析出,析出峰值为980℃,最短时间为5h。少量的η相对力学性能没有影响,η相的增多对合金的拉伸强度和持久寿命影响不显著,η相对Z的影响要比对A的影响要大。冲击性能对η相最为敏感。 Effects of -η phase on mechanical properties of GH4133B alloy were studied by using optical microscope, SEM and electron probe. The results show that η phase is precipitated at the temperature from 750 to 1000 ℃, the precipitation peak is at 980 ℃ and ηphase starts to precipitate after heated at 980 ℃ for 5 h. The further investiga tion shows that few η phase has no influence on the mechanical properties of the ahoy. With the content of η phase increasing, influence of η phase on the tensile strength and creep rupture life of the alloy is unobvious, and influence of η phase on Z is larger than that one on A. Also, the impact property of GH4133B has sensitivity to η phase.
出处 《钢铁研究学报》 CAS CSCD 北大核心 2014年第8期64-68,共5页 Journal of Iron and Steel Research
关键词 GH4133B合金 Η相 力学性能 GH4133B alloy η phase mechanical property
  • 相关文献

参考文献9

  • 1Bradly E F. Superalloys: A Technical Guide [M]. OH: Metals Park, 1988.
  • 2张冬梅,国振兴,陈仲强,牛昌安,史凤岭.改型GH4133A合金长期时效的组织稳定性研究[J].材料与冶金学报,2010,9(2):121-126. 被引量:3
  • 3张冬梅,国振兴,杨树林,史凤岭,王玉华.改型GH4133A合金长期时效的性能稳定性研究[J].材料与冶金学报,2012,11(3):202-206. 被引量:1
  • 4Park N K, Kim I S, Na I S, et at. Hot Forging of a Nickel- Base Superalloy [J]. Journal of Materials Processing Technolo- gy, 2001,111(1) :98.
  • 5王晓辉,郑磊,张麦仓,董建新.GH4133B合金组织特征及平衡相析出热力学研究[J].稀有金属材料与工程,2011,40(6):1005-1009. 被引量:4
  • 6蒙肇斌,王延庆,乔雪璎,林奔,郑磊.GH4133B合金长期时效处理后组织与力学性能的研究[J].钢铁研究学报,2011,23(S2):122-125. 被引量:1
  • 7Medeiros S C, Prasad Y V R K, Frazier W G, et al. Micro- structural Modeling of Metadynamic Recrystallization in Hot Working of In718 Superalloy [J]. Materials Science and Engineering, 2000,293A: 198.
  • 8Burgor J L, Biederman R R, Couts W H. The Effects of Start- ing Condition on the Aging Response of As-Forged Alloy 718 [C] // Superalloy 718 - Metallurgy and Applications. USA: TMS, 2004 : 207.
  • 9Li S Q, Zhang J Y, Yang J Y, et al, The Effect of Phase on Crack Propagation Under Creep and Fatigue Conditions in Al- loy 718 [C]//Superalloys 718, 625, 706 and Various Derivatives. USA : TMS, 1994 : 545.

二级参考文献13

  • 1Elihu F, Bradly. Superalloys : a technical guide [ M]. Metals Park, OH, ASM International, 1988.
  • 2Park N K, Kim I S, Na Y S, et al. Hot forging of a nickel - base superalloy[J]. Joural of materials processing technology, 2001,111(1) : 98 -102.
  • 3Medeiros S C, Prasad Y V R K, Frazier W G, et al. Microstructural moldeling of metadynamic recrystallization in hot working of in 718 superalloy [J ]. Materials science and engineering A, 2000, 293 : 198 -207.
  • 4Shi Changxu(师昌绪).Zhong Zengru(钟增儒)..Superalloy in Chinaduring Fifty Years(中国高温合金50年)[M]..Beijing:Metallurgical Industry Press,,2006.8..63..
  • 5Andersson J-O, Thomas Helander, Lars Hdghmd et al. Calphad[J], 2002, 26(2): 273.
  • 6Bernhard C Schaffernak, Horst H Cerjak. Calphad[J], 2001, 25(2): 241.
  • 7Hwang J Y, Nag S, Singh A R Pet al. Scripta Materialia[J], 2009, 61:92.
  • 8Liang Yongchun(梁永纯).Yuan Chao(袁超)et al..The Symposium of the 11th Chinese Annual Conference on Superalloy(第十一届中国高温合金年会论文集)[C]..Bering Metallurgy Industry Press,,2007..232..
  • 9Nayeb-Hashemi AA,Clark JB.Phase Diagrams of Binary Magnesium Alloys[]..1988
  • 10Park N K,Kim I S,Na Y S,et al.Hot forging of a nickel base superalloy[].Journal of Materials.2001

共引文献5

同被引文献18

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部