摘要
Due to the higher reliability and small ground space requirement, compressed GIS （gas insulated substation） has found extensive applications in urban areas and developing countries. The major parts of GIS is the gas insulated busducts, circuit breakers, isolators, etc.. The voltage withstand capability of SF6 （sulphur hexafluoride） busduct is strongly dependent on field perturbations such as those caused by conductor surface imperfections and by conducting particle contaminants which arise due to manufacturing process, mechanical vibrations, moving parts of system etc.. Contamination can create insulation problems at operating fields. An optimized design of GIS by varying the inner and outer diameter to 89 mm and 241 mm is considered for analysis and compared with a single phase enclosure with outer diameter as 152 mm and inner conductor diameter of 55 mm with aluminum and copper particles of size 10 mm in length and 0.25 mm in radius present on the enclosure. The results have been compared on the extent of particle movement for the same condition of the gas and particle geometry. Monte Carlo simulation is also carried out for determining the motion of particles in axial and radial directions. The random solid angle is changed from 1 to 0.5 degrees to take into account more smooth end profile of the particle. The simulation results have been presented and analyzed.
