摘要
This study aims to analyze the quality of positioning orthophoto generated through the technique of direct georeferencing using metric digital camera system coupled to the laser system, and both systems were aided inertial navigation platform. For this, we compared the coordinates obtained in 16 control points collected in the field with dual-frequency GNSS （global navigation satellite system） receiver with those obtained in the orthophoto, flight conducted in June 2009 on the campus of the State University of Campinas--UNICAMP, using a medium format digital camera and laser system, with which we obtained images with a spatial resolution of 0.15 m. Taking into account the pattern accuracy cartographic used in Brazil, it is concluded that the products produced have a standard accuracy ＂A＂ to 1：2,000 scale, which represents the best quality level, both for planimetric as for altimetry, and that the procedure reached results consistent with cartographic products in 1：2,000 scale, representing a reduction of steps in the mapping process, necessary for the preparation of cartographic databases with reduction of time for preparation of design basis large civil engineering projects, such as roads, railways, studies of urban road systems, power plants and other infrastructure systems needed to develop the country.
