摘要
竹篾帘拼长是制备超长竹篾层积材(LBSL)的必要手段,竹篾帘端头搭接是拼长的方式之一。对LBSL抗弯及抗拉性能的测试结果表明:搭接长度和位置对板材力学性能影响显著;增加搭接长度有利于提高其抗弯和抗拉性能,当搭接长度大于10mm时,板材的力学性能趋于稳定;搭接接头位于芯层时,板材性能优于接头位于表层。LBSL生产组坯工序要保证竹篾帘搭接长度,同时尽量避免板坯表层出现搭接。
Lap joints are necessary for making ultra-long laminated bamboo sliver lumber （LBSL）. Effects of the length and the position of lap joints were analyzed by testing the lumber＇s bending and tensile strength. The results showed that the length and the position had significant influence on bending （MOE and MOR） and tensile strength （ts）. The length had no significant effect until it exceeded 10 mm. However, when the joints were at the surface of the lumber there was a negative influence on bending and tensile properties. It was concluded that the length of the joints should be longer than 10 mm and should not be at the surface of the lumber.
出处
《木材工业》
北大核心
2014年第5期5-8,共4页
China Wood Industry
基金
林业公益性行业科研专项"大跨度竹质工程构件制造关键技术研究与示范"(201204701)
关键词
竹篾层积材(LBSL)
竹篾帘
搭接
抗弯性能
抗拉性能
laminated bamboo sliver lumber （LBSL）
bamboo curtain
lap joint
bendingperformance
tensile strength
