摘要
皖北煤电集团卧龙湖煤矿8煤层为瓦斯突出煤层,为消除煤层瓦斯突出的危险性,有效地降低煤层瓦斯含量和压力,采取顺煤层钻孔预抽回采区域煤层瓦斯措施。根据施工顺煤层钻孔的特殊要求,对顺煤层钻孔施工所需的设备、钻杆、钻具等进行了改进,并通过现场实验和试用,全面提升了顺煤层钻孔施工的工效,减少了钻孔在施工过程中喷孔、吸钻的次数,降低了钻探的投入。该技术及工艺在类似矿井中具有良好的推广前景。
Seam No.8 in Wolonghu Mine of North Anhui Coal Power Group is a seam prone to gas outburst. In order to remove the gas outburst risk from the seam, to effectively decrease the gas content and pressure in the seam, gas pre-drainage is adopted by using in-seam boreholes. According to the special requirements for drilling in-seam boreholes,multiple improvement has been performed with respect to the equipment, rod, tools required for drilling in-seam boreholes. Through great amount of field test and trial application, the drilling efficiency of in-seam borehole has been greatly improved. The frequency of blowout and attracting drill string during drilling has been reduced, decreasing drilling cost. It has good promotion prospect in similar mines.
出处
《煤田地质与勘探》
CAS
CSCD
北大核心
2014年第5期107-108,共2页
Coal Geology & Exploration
关键词
顺煤层钻孔
工艺
钻机
钻杆
in-seamborehole
technology
drill rig
drill rod