摘要
采用UASB-A/O工艺处理制药废水,在进水COD浓度为37 580 mg/L时,经科学调试,该工艺处理后,废水中的COD去除率可达到98%以上,出水达到设计要求。工程运行实践表明,该技术处理效果良好,是解决高浓度有机废水的有效途径,适于推广。
UASB-A/O process was used for treating pharmaceutical waste water. Under the condition that the concentration of COD in feed water is 37580 mg/L, by using this process and with proper adjustment, 98%of the COD in waste water can be removed, from which the design requirement was reached. It has been proved from engineering practice that this technology has good effect and can provide an efifcient method for treating high concentration organic waste water, which is worthwhile in wide propagation.
出处
《化工与医药工程》
2014年第4期28-31,共4页
Chemical and Pharmaceutical Engineering