摘要
针对目前机场助航灯检测系统存在的耗时、耗力等问题,设计了一种基于TSL256x光强传感器以及单片机控制器的监控系统.该监控系统以单片机为主控制器,利用TSL256x测量光照强度并将其转换成数字信号,输入单片机进行数据分析处理,进一步对助航灯的开关进行控制,实现了助航灯自动监控系统.研究认为,该系统能够对整个机场的助航灯进行自动监控.
In order to solve the existing time-consuming problem on the airport navigational lights detection system, a monitoring system based on TSL256x sensor and microcontroller was designed and realized. The monitoring system used microcontroller as the main controller, light intensity is measured by TSL256x and converted into digital signal. Which is entered into the microcontroller for data analysis and processing and is transferred to the control module, and to control further navi-gational light switch. The automatic control system for navigational lights has been realized. This system is very good for the entire airport navigational lights monitor through analysis and research.
出处
《成组技术与生产现代化》
2014年第3期41-44,共4页
Group Technology & Production Modernization
基金
辽宁省工业攻关计划资助项目(2012231009)
关键词
助航灯
光强传感器
单片机
监控系统
navigation lamp
light intensity sensors
microcontroller
surveillance systems