期刊文献+

复鞣剂类型对皮革物理和热解性能的影响 被引量:1

Influence of Retanning Agents on Physical and Pyrolysis Properties of Leather
下载PDF
导出
摘要 研究了4种不同类型的复鞣剂对山羊革物理和热解性能的影响。结果表明:丙烯酸聚合物复鞣剂对革的收缩温度、厚度和抗张强度提高最多,其耐热稳定性也最好;双氰胺树脂复鞣剂复鞣后,革样的撕裂强度和崩裂强度最高;醛类混合物鞣剂复鞣后,革样的断裂伸长率最长,而且其在800℃下的分解物残留率最低。 The influences of four types of retanning agents on the physical and pyrolysis properties of goat leather were studied.The results show that acrylic polymer retanning agents can greatly improve all the properties of leather,such as shrinkage temperature,thickness,tensile strength and the pyrolysis performance. The dicyandiamide resin retanning agents can only improve the tear strength and burst strength significantly. The breaking elongation of leather,which is retanned by aldehyde compound tanning agents is the best,and the residual rate of its decomposition is the lowest at 800℃.
出处 《中国皮革》 CAS 北大核心 2014年第17期20-22,共3页 China Leather
关键词 复鞣剂 皮革 物理性能 热解 retanning agent leather physical property pyrolysis
  • 相关文献

参考文献7

二级参考文献30

  • 1何芳,蔡均猛,徐梁,易维明,柏雪源,李永军.几种生物质热解过程的TG-DSC分析[J].农机化研究,2005,27(2):163-166. 被引量:13
  • 2黄育珍.皮和革在不同湿含量下的热稳定性[J].皮革科学与工程,1994,4(3):32-38. 被引量:2
  • 3钱锦标,张宗才.分步加脂理论及实践[J].中国皮革,1994,23(7):27-29. 被引量:4
  • 4范浩军,石碧,彭必雨.现代热分析技术在皮革涂饰材料结构和性能检测中的应用(Ⅰ)[J].皮革科学与工程,1997,7(1):38-43. 被引量:2
  • 5张铭让 陈武勇.制革化学[M].北京:中国轻工业出版社,1999.304-307.
  • 6Milton Bailey, Norman F. Audet, Marie F. Demorais, et. Evaluation of flammability of footware upper materialspatent and regular shoe upper leather vs. porvair clarion poromerics [ J]. JALCA, 1984,79 : 16 - 26.
  • 7Caballero J A, Font R , Esperanza M M. Kinetics of the thermal decomposition of tannery waste [ J ]. Journal of Analytical and Applied Pyrolysis. 1998,47:165 -181.
  • 8李立新.阻燃皮革功能材料及阻燃技术相关问题研究与应用[D].四川大学博士论文,2008:8.
  • 9A V brigdewater. Principles and practice of biomass pyrolysis processes for liquids[J].Journal of analytical and applied pyrolysis,1999, (51) :3-22.
  • 10Miller R S,J Bellan. A generalized biomass pyrolysis model based on superimposed celluose, hemicellulose and lignin kinetics[J].Combustsci and tech, 1997,126:97-137.

共引文献41

同被引文献13

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部