大型螺纹旋风硬铣削有限元仿真研究
摘要
本文在试验研究的基础上,利用DEFORM软件对PCBN刀具旋风硬铣削大型螺纹的过程进行仿真模拟,对仿真得到的应力分布图、温度分布图、应变率分布图、切削力等进行分析,进一步明晰了绝热剪切行为作用下的锯齿状切屑形成机理,对优化切削工艺参数,提高螺纹加工精度具有重要的指导意义。
出处
《煤矿开采》
北大核心
2014年第B11期149-151,共3页
Coal Mining Technology
基金
江苏省高校科研成果产业化推进项目(JHB2012-66)
参考文献5
-
1[美]戴维斯(Davis,J.R.)等编著.金锡忐译.金属于册[M].机械工业出版社,2011.1.
-
2OzelT,Zeren E. Determination of wnrk maleria llow stress and fi'ic- tion for FEA of machining using orthogonal cutting tests [J]. Journal of material otx~eessing technology, 2004( 153- 154): 1019-1025.
-
3Huang Y, Liang S Y. Cutling forees modeling consider ing the effect of tool thermal property application to CBN hard turning [J]. lnlernation- al journal of machine tools and m- anufacturc, 2003(43 ): 307-315.
-
4Umbrello.D,OuteiroJ.C,Saoubi R M,elal A nmn ericalmodel incor- porating tile m- ierostrue ture aheration for predicting residual streses in hard maehining of A1SI 52100 steel [J]. Annals of CIRP,2010(59): 13-116.
-
5倪寿勇,李迎.大型GCr15丝杠高速硬旋铣多尺度有限元建模关键技术研究[J].现代制造工程,2011(5):109-116. 被引量:2
二级参考文献23
-
1ASM international. Quenching and tempering of steel, in: ASM handbook [ J ]. Heat treating, 1991 ( d ) : 160 - 324.
-
2Denkena B,Altan T. Influence of materials models used in finite element modeling on predicted scaling effects in machining [ J ]. Production engineering, 2006 ( WGP 13 ) : 103 - 1138.
-
3Kountanya R, A1-Zkeri I, Altan T. Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel [ J ]. Journal of material processing technology, 2009 ( 209 ) : 5068 - 5076.
-
4Baker M, Rosler J, Siemers C. A finite element model of high speed metal cutting with adiabatic shearing [ J ]. Computers and Structures,2002(80) : 495 -513.
-
5Vaz Jr M, Owen D R J. Modelling and simulation of machining processes [ J ]. Archives of computational methods in engineering, 2007 ( 14 ) : 173 - 204.
-
6Atkins A G. Modeling metal cutting using modem ductile fracture mechanics: quantitative explanations for some longstanding problems [ J ]. International journal mechanical sciences ,2003 (45).
-
7Rosa P A R,Martins P A F,Atkins A G. Revisiting the fundamentals of metal cutting by means of finite elements and ductile fracture mechanics [ J ]. International journal of machine tools & manufacture,2007 (47) : 607 - 617.
-
8Zorev N N. Results of work in the field of the mechanics of the metal cutting process [ C ]. In : Proceedings of the conference on the technology of engineering manufacture. Institution of mechanical engineers, 1958,p. 255 - 266 and Plates 4 - 7.
-
9Atkins A G. Toughness, the shearing of self-mated junctions, and friction [ J ]. Wear,2004 (257) : 154 - 156.
-
10Ozel T,Zeren E. Determination of work material flow stress and friction for FEA of machining using orthogonal cutting tests [ J ]. Journal of materials processing technology, 2004 (153 - 154) : 1019 - 1025.
-
1王建波.影响数控车床加工螺纹精度的因素与改进措施[J].中国化工贸易,2013,5(A02):145-145.
-
2杞洪涛,王锦祥,何武.VMC1250加工中心螺纹加工精度的恢复[J].装备维修技术,2010(4):27-28.
-
3汤多良,陈兆杰,章宏令.铣削镍基高温合金刀具耐用度的试验研究[J].煤矿机械,2010,31(10):54-56. 被引量:2
-
4代绪慧,黄春磊.可伐合金零件铣加工的高效加工工艺研究[J].科技视界,2014(15):82-82.
-
5仇健,李健康.铝合金铣削力和温度场的试验研究[J].精密制造与自动化,2014(4):15-18. 被引量:3
-
6李燕飞.如何提高数控车床螺纹加工精度[J].科技资讯,2011,9(23):38-38. 被引量:3
-
7朱红雨,李迎.基于微观锯齿状切屑的旋风硬铣削加工机理研究[J].组合机床与自动化加工技术,2014(6):118-120. 被引量:3
-
8倪国庆.浅谈提高数控车削螺纹精度的方法[J].企业导报,2012(11):289-289.
-
9邸柏林.论等离子体在表面技术中的应用[J].表面技术,1995,24(1):1-5. 被引量:9
-
10米振莉,薛瑶,吴彦欣,江海涛.基于Dynaform软件的TWIP钢延迟断裂研究[J].金属热处理,2014,39(6):126-129. 被引量:3