摘要
目的减小不良刺激、尤其要增加操作中的可感可控性确定为针具的选择要求和改良目的。方法分析圆利针针尖力学特征,明确60°锥度的改良设计优势,并小圆角化其尖端,形成松解专用钝尖圆针;制定、完善与之相适应的聚刺筋结操作方法及步骤。结果对颈椎病、肩周炎、膝骨关节炎总计226例患者作临床观察,验证了针具优良操控性和聚刺的高疗效。结论带有60°锥度和小圆角尖端的钝圆针能指导对靶点筋结的针刺方向和治疗剂量,疗效佳。
ObjectiveTo reduce the adverse stimulations especially to increase the sensibility and controllability in the operation the selection requirements and improvement purposes of the therapeutic needle were identified.Methods The round sharp needle was applied and further modified. On the detailed analysis of mechanical features and design advantages, the needle tip was blunted by taking 60° taper, then by shaping a small fillet at its end. So the dedicated blunt tip round needle was got. Subsequently the adaptive poly-acupuncture therapy on tendon knots was eventually developed along with the formulation and perfection of the operating methods and steps.Results The excellent handling of the modified needle and the high therapeutic effect of the therapy were both verified finally after the clinical observation of 226 cases in total, and of three kinds of diseases including cervical spondylosis, shoulder periarthritis and knee osteoarthritis.Conclusion The modified blunt tip round needle with 60° taper and a small fillet end own the function guiding both direction and frequency of acupuncture on the targeted tendon nodules.
出处
《中国医药指南》
2014年第28期58-60,共3页
Guide of China Medicine
关键词
钝尖圆针
60°锥度
小圆角
聚刺针法
筋结
Blunt tip round needle
60&#176
taper
Small fillet
Poly-acupuncture
Tendon nodules