摘要
弧齿锥齿轮是减速箱中的重要零件,其轮齿是用圆形端铣刀盘切制的,对于直径较大的铣刀盘的刀头是镶在刀体上的。在切削过程中,刀片不断磨损,需要及时刃磨铣刀片的前面,以保持刀片切削刃口的锋利。通过对夹具体的锯齿状角度设计可以实现在平面磨床上对铣刀头刃磨,以保证铣刀头具有良好的前角。
the spiral bevel gear is an important part of gear box, its gear tooth are cut with a round end milling cutter, the milling cutter head with larger diameter is inlaid on the cutter body. In the process of cutting, the blade is weared constantly, and the front part of the milling blade needs to sharpen the edge timely to keep the blade cutting edge sharp. The design of the zigzag angle clamp body can realize the sharpening of the cutter blade on the surface grinder to ensure that the milling cutter head has a good rake angle.
出处
《山西科技》
2014年第5期158-160,共3页
Shanxi Science and Technology
关键词
弧齿锥齿轮
铣刀片
前角
spiral bevel gear
milling cutter
rake angle
