期刊文献+

枫香树脂/丙烯酸酯复合乳液及其压敏胶的性能 被引量:2

Study on Preparation of Chinese Sweetgum Resin / Acrylate Composite Emulsion and Properties of the Pressure Sensitive Adhesive
下载PDF
导出
摘要 以混合丙烯酸酯为共聚单体,枫香树脂为增粘剂,过硫酸铵(APS)为引发剂,十二烷基硫酸钠(SDS)、烷基酚聚氧乙烯醚(OP-10)为乳化剂,采用预乳化半连续乳液聚合法制备枫香树脂-丙烯酸酯复合乳液。研究枫香树脂用量对单体转化率、凝胶率、玻璃化转变温度、热稳定性以及压敏胶(PSA)粘接性能的影响。结果表明,在枫香树脂一定的质量分数范围内,随着枫香树脂用量的增加,分子量、凝胶率、热稳定性、玻璃化转变温度随之增加。枫香树脂的适宜用量为质量分数10.0%,此时压敏胶的初粘力为16#,180°剥离强度为10.12 N·25 mm-1。 Chinese Sweetgum Resin/acrylate composite emulsion was prepared by pre-emulsification semi-continual emulsion poly-merization with mixed acrylic ester as monomer ,Chinese Sweetgum Resin as tackifying resin ,ammonium persulfate ( APS) as initiator and sodium dodecyl sulfate(SDS),alkyl phenol polyoxyethylene ether (OP-10)as emulsifier.The effects of amount of Chinese Sweet-gum Resin on the conversion of monomer ,the gel rate,glass transition temperature,thermal stability and the bonding performance of PSA;The results showed that within the scope of the mass fraction of Chinese Sweetgum Resin ,with the increase of Chinese Sweet-gum Resincontent ,molecular weight and gel rate ,thermal stability ,glass transition temperature increased.And the pressure sensitive adhesive was obtained and its probe tack was 16#,peel strength was 10.12 N· 25 mm-1 ,when mass fraction of Chinese Sweetgum Resin was 10%wt.
出处 《福建林业科技》 北大核心 2014年第3期94-99,共6页 Journal of Fujian Forestry Science and Technology
基金 国家林业公益专项基金项目(200704033) 江苏省高校优势学科建设工程项目(164020639) 南京林业大学优博基金资助
关键词 枫香树脂 丙烯酸酯 乳液聚合 压敏胶 Chinese Sweetgum Resin acrylic ester emulsion polymerization PSA
  • 相关文献

参考文献16

二级参考文献55

共引文献62

同被引文献30

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部