期刊文献+

An Experimental Investigation of Heat Transfer Characteristics for Steam Cooling in a Rectangular Channel with Parallel Ribs

An Experimental Investigation of Heat Transfer Characteristics for Steam Cooling in a Rectangular Channel with Parallel Ribs
原文传递
导出
摘要 An experimental study of heat transfer characteristics in superheated steam cooled rectangular channels with parallel ribs was conducted.The distribution of the heat transfer coefficient on the rib-roughed channel was measured by IR camera.The blockage ratio(e/Dh) of the tested channel is 0.078 and the aspect ratio(W/H) is fixed at3.0.Influences of the rib pitch-to-height ratio(P/e) and the rib angle on heat transfer for steam cooling were investigated.In this paper,the Reynolds number(Re) for steam ranges from 3070 to 14800,the rib pitch-to-height ratios were 8,10 and 12,and rib angles were 90°,75°,60°,and 45°.Based on results above,we have concluded that:In case of channels with 90° tranverse ribs,for larger rib pitch models(the rib pitch-to-height ratio=10 and12),areas with low heat transfer coefficient in front of rib is larger and its minimum is lower,while the position of the region with high heat transfer coefficient nearly remains the same,but its maximun of heat transfer coefficient becomes higher.In case of channels with inclined ribs,heat transfer coefficients on the surface decrease along the direction of each rib and show an apparent nonuniformity,consequently the regions with low Nusselt number values closely following each rib expand along the aforementioned direction and that of relative high Nusselt number values vary inversely.For a square channel with 90° ribs at Re= 14800,wider spacing rib configurations(the rib pitch-to-height ratio=10 and 12) give an area-averaged heat transfer on the rib-roughened surface about8.4%and 11.4%more than P/e=8 model,respectively;for inclined parallel ribs with different rib angles at Re=14800,the area-averaged heat transfer coefficients of 75°,60° and 45° ribbed surfaces increase by 20.1%,42.0%and 44.4%in comparison with 90° rib angle model.45° angle rib-roughened channel leads to a maximal augmentation of the area-averaged heat transfer coefficient in all research objects in this paper.
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2014年第5期454-464,共11页 热科学学报(英文版)
基金 funded by the National Natural Science Foundation of China(Funding No.51206109)
关键词 Gas turbine cooling Steam cooling Rib-roughed channel Local heat transfer enhancement 矩形通道 蒸汽制冷 传热特性 肋条 平行 平均传热系数 试验 蒸汽冷却
  • 相关文献

参考文献2

二级参考文献47

  • 1Bohn D,Balkowski I.Interaction of steam flow and oxidation-layer at the surface of steam turbine guide vanes at higher steam parameters of 620 ℃ and 93 Bar[R].ISROMAC10-2004-155,10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery,Hawaii:March 07-11,2004.
  • 2Nomoto H,Konga A,Ito S,et al.The advanced cooling technology for the 1 500 ℃ class gas turbine:steam-cooled vanes and air-cooled blades[J].Journal of Engineering for Gas Turbines and Power,1997,119:624-632.
  • 3Bohn D,Wolff A,Wolff M,et al.Experimental and numerical investigation of a steam-cooled vane[R].ASME Paper GT-2002-30210,2002.
  • 4Bohn D,Ren J,Kusterer K.Cooling performance of the steam-cooled blade in a steam turbine cascade[R].ASME Turbo Expo.Reno,Nevada,USA:Paper No.GT2005-68148,2005.
  • 5Anderson W K,Thomas J L,van Leer B.A comparison of finite volume flux vector splittings for the euler equations[R].AIAA-paper 85-0122,1985.
  • 6Baldwin B S,Lomax H.Thin layer approximation and algebraic model for separated turbulent flows[R].AIAA-paper 78-257,1978.
  • 7Bohn D,Schonenborn H.3-D coupled aerodynamic and thermal analysis of a turbine nozzle guide vane[R].Proceedings of 19th ICTAM,Kyoto,Japan:1996.
  • 8Wagner W,Cooper J R,Dittmann A,et al.The IAPWS industrial formulation 1997 for the thermodynamic properties of water and steam[J].Transactions of the ASME,2000,122:150-182.
  • 9Bohn D,Bonhoff B,Schonenborn H,et al.Validation of a Numerical Model for the Coupled Simulation of Fluid flow and Diabetic Walls with Application to Film-cooled Gas Turbine Blades[R].VDI-Berichte Nr.1186,1995.
  • 10Bohn D,Bonhoff B,Schonenborn H,et al.Prediction of the film-cooling effectiveness of gas turbine blades using a numerical model for the coupled simulation of fluid flow and adiabatic walls[R].AIAA-paper-95-7105,1995.

共引文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部