期刊文献+

Preparation and optical properties of waterborne acrylic-based cool white coatings 被引量:1

Preparation and optical properties of waterborne acrylic-based cool white coatings
原文传递
导出
摘要 Cool coatings(solar reflective coatings)possess a high total solar reflectance and a high thermal emittance,and they have potential applications in building surfaces,pavements,and oil tanks.By decreasing the accumulation of heat,these coatings can reduce the urban heat island effect to increase thermal comfort and to decrease energy consumption in hot zones.In this work,a cool white coating based on waterborne acrylic was prepared.The reflectance and thermal emittance were measured using an ultravioletvisible-near-infrared spectrophotometer and the steadystate calorimetric technique,respectively.The cool coating possessed a total solar reflectance of 0.887 and a thermal emittance of 0.85.The linear fitting results indicated that the thickness of the dry film is an important factor that affects the reflectance and that the physical limit of total solar reflectance in practical cool coatings is 0.91.A homemade device developed according to military specification MIL-E-46096C was used to measure insulation temperature differences,and an insulation temperature difference of29°C was obtained.The above results demonstrated that the cool coating can be applied to buildings. Cool coatings (solar reflective coatings) possess a high total solar reflectance and a high thermal emittance, and they have potential applications in building surfaces, pavements, and oil tanks. By decreasing the accumulation of heat, these coatings can reduce the urban heat island effect to increase thermal comfort and to decrease energy consumption in hot zones. In this work, a cool white coating based on waterborne acrylic was prepared. The reflectance and thermal emittance were measured using an ultraviolet- visible-near-infrared spectrophotometer and the steady- state calorimetric technique, respectively. The cool coating possessed a total solar reflectance of 0.887 and a thermal emittance of 0.85. The linear fitting results indicated that the thickness of the dry film is an important factor that affects the reflectance and that the physical limit of total solar reflectance in practical cool coatings is 0.91. A homemade device developed according to military specification MIL-E-46096C was used to measure insulation temperature differences, and an insulation temperature difference of 29 ℃ was obtained. The above results demonstrated that the cool coating can be applied to buildings.
出处 《Chinese Science Bulletin》 SCIE EI CAS 2014年第31期4142-4146,共5页
基金 supported in part by the National High Technology Research and Development Program of China(2012AA030305) the National Key Technology R&D Program(2012BAA10B03) the National Science Foundation for Distinguished Young Scholars of China(51325203) InnovationProgram of Shanghai Municipal Education Commission(14ZZ099)
关键词 水性丙烯酸 白涂料 丙烯酸系 光学性能 红外分光光度计 反射涂层 制备 城市热岛效应 Urban heat island Cool white coating Total solar reflectance Thermal emittance Insulation temperature difference
  • 相关文献

参考文献19

  • 1Mastrapostoli E, Karlessi T. Pantazaras A et al (2014) On the cooling potential of cool roofs in cold climates: use of cool fluorocarbon coatings to enhance the optical properties and the energy performance of industrial buildings. Energy Build 69:417-425.
  • 2Santamouris M (2013) Using cool pavements as a mitigation strategy to fight urban heat island a review of the actual developments. Renew Sustain Energy Rev 26:224-240.
  • 3Goldreich Y (2006) Ground and top of canopy layer urban heat island partitioning on an airborne image. Remote Sens Environ 104:247-255.
  • 4Huang L, Li J, Zhao D et al (2008) A fieldwork study on the diumal changes of urban microclimate in four types of ground cover and urban heat island of Nanjing, China. Build Environ 43:7-17.
  • 5Kolokotroni M, Zhang Y, Watkins R (2007) The London Heat Island and building cooling design. Sol Energy 81:102-110.
  • 6Carnielo E, Zinzi M (2013) Optical and thermal characterisation of cool asphalts to mitigate urban temperatures and building cooling demand. Build Environ 60:56-65.
  • 7Joudi A, Svedung H, Bales C et al (2011) Highly reflective coatings for i.
  • 8nterior and exterior steel cladding and the energy efficiency of buildings. Appl Energy 88:4655-4666.
  • 9Shi Y, Song Z, Zhang Wet al (2013) Physicochemical properties of dirt-resistant cool white coatings for building energy effi- ciency. Sol Energy Mater Sol Cells 110:133-139.
  • 10Akbari H, Menon S, Rosenfeld A (2009) Global cooling: increasing world-wide urban albedos to offset COz. Clim Chang 94:275-286.

同被引文献7

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部