摘要
在含有脂肪酶的油包水(W/O)乳化液体系中添加交联剂,经乳化交联后通过离心分离得到脂肪酶球形酶颗粒,考察了不同交联剂、交联时间和酶液质量浓度对球形酶活性的影响,得到制备脂肪酶球形酶的适宜条件为:以体积比1∶1的体积分数25%戊二醛溶液与体积分数3%聚乙烯亚胺溶液,在室温下反应5 min而形成的Glu-PEI共聚物为交联剂,交联2 h,酶质量浓度为50 g/L时形成的球形酶酶活残留率最高达到86.3%。
Through adding cross-linking agent into water-in-oil (W/O) emulsion system of Lipase solution, Lipase spherezymes is formed after emulsifying cross-linked by centrifugation. This paper studies different cross-linking agents, different cross-linking time and different enzyme mass concentration to the affect of spherezymes activity. This paper concludes that the suitable condition of making Lipase spherezymes is: 25% glutaraldehyde solution and 3% polyethyleneimine solution are allowed to react for 5min in a 1︰1 volumetric ratio at room temperature, then the Glu-PEI copolymer is formed and used for cross-linking agent of Lipase spherezymes, and cross-linking time is 2 hour and enzyme concentration is 50g/L, the residual ratio of the Lipase spherezymes activity is up to 86.3%.
出处
《精细化工》
EI
CAS
CSCD
北大核心
2014年第11期1333-1336,共4页
Fine Chemicals
基金
甘肃省科学院青年创新基金(2012QN-14)~~
关键词
乳化液
脂肪酶球形酶
固定化酶
生物工程
emulsion
lipase spherezymes
immobilized enzyme
biological engineering.