期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Design and Manufacturing of Ultra-Hard Micro-Milling Tool

Design and Manufacturing of Ultra-Hard Micro-Milling Tool
下载PDF
导出
摘要 Based on the study of existing typical micro-milling tools and the actual demand for micro-milling tools, the P3 design principle and design flow for ultra-hard micro-milling tool were introduced to give basic guidance for the optimization of micro-milling tools. Then, according to the P3 design flow, the manufacturing process of polycrystalline diamond(PCD) micro-milling tool was proposed, and the PCD micro-milling tool with diameter of 0.5 mm was developed. Finally, the micro-milling test on the slot was carried out to study the milling performance of PCD micromilling tool. Based on the study of existing typical micro-milling tools and the actual demand for micro-milling tools, the P3 design principle and design flow for ultra-hard micro-milling tool were introduced to give basic guidance for the optimization of micro-milling tools. Then, according to the P3 design flow, the manufacturing process of polycrystalline diamond(PCD) micro-milling tool was proposed, and the PCD micro-milling tool with diameter of 0.5 mm was developed. Finally, the micro-milling test on the slot was carried out to study the milling performance of PCD micromilling tool.
作者 战忠波 李亮 何宁 卞荣 赵孟
机构地区 College of Mechanical and Electrical Engineering
出处 《Transactions of Tianjin University》 EI CAS 2014年第6期415-421,共7页 天津大学学报（英文版）
基金 Supported by the National Natural Science Foundation of China(No.50935003) Science and Technology Support Project of Jiangsu Province,China(No.BE2012172)
关键词 MICRO-MILLING MICRO-MILLING TOOL ultra-hard material POLYCRYSTALLINE diamond (PCD) finite elementanalysis micro-milling micro-milling tool ultra-hard material polycrystalline diamond(PCD) finite element analysis
分类号 TQ163 [化学工程—高温制品工业]
  • 相关文献

参考文献16

  • 1Chae J, Park S S, Freiheit T. Investigation of micro-cuttingoperations[J]. International Journal of Machine Tools andManufacture, 2006, 46(3-4): 313-332.
  • 2Cheng X, Wang Z, Nakamoto K et al. A study on themicro-tooling for micro/nano milling[J]. InternationalJournal of Advanced Manufacturing Technology, 2011,53(5-8): 523-533.
  • 3Aramcharoen A, Mativenga P T. Size effect and toolgeometry in micromilling of tool steel[J]. PrecisionEngineering, 2009, 33(4): 402-407.
  • 4Denkena B, Hoffmeister H W, Reichstein M et al. Micromachiningprocesses for microsystem technology[J].Microsystem Technologies, 2006, 12(7): 659-664.
  • 5Uhlmann E, Schauer K. Dynamic load and strain analysisfor the optimization of micro end mills[J]. CIRP Annals -Manufacturing Technology, 2005, 54(1): 75-78.
  • 6Aurich J C, Reichenbach I G, Schüler G M. Manufactureand application of ultra-small micro end mills[J]. CIRPAnnals - Manufacturing Technology, 2012, 61(1): 83-86.
  • 7Cheng X, Nakamoto K, Sugai M et al. Development ofultra-precision machining system with unique wire EDMtool fabrication system for micro/nano-machining[J].CIRP Annals - Manufacturing Technology, 2008, 57(1):415-420.
  • 8Cheng X, Wang Z G, Nakamoto K et al. Design anddevelopment of a micro polycrystalline diamond ball endmill for micro/nano freeform machining of hard and brittlematerials[J]. Journal of Micromechanics and Microengineering,2009, 19(11): 115022.
  • 9Fonda P, Katahira K, Kobayashi Y et al. WEDM conditionparameter optimization for PCD microtool geometryfabrication process and quality improvement[J]. InternationalJournal of Advanced Manufacturing Technology,2012, 63(9-12): 1011-1019.
  • 10Katahira K, Nakamoto K, Fonda P, et al. A novel techniquefor reconditioning polycrystalline diamond tool surfacesapplied for silicon micromachining[J]. CIRP Annals -Manufacturing Technology, 2011, 60(1): 591-594.
Transactions of Tianjin University
2014年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部