摘要
定子绕组匝间短路是异步电动机常见的故障之一。基于Matlab对三相异步电动机进行数学建模,并通过Clarke变换将三相静止坐标系下的数学模型转换为两相静止坐标系,引入二阶不对称矩阵模拟定子匝间短路,对该模型进行数字仿真。采用Ansoft Maxwell 2D对其进行有限元分析,验证了模型的正确性。
Stator inter-turn short-circuit fault is a common fault in induction motor.A mathematical model of an induction motor is established using Matlab.A simplified model in a two-phase stationary coordinate system is obtained with Clarke transformation.A second order asymmetric matrix is introduced to imitate inter-turn short-circuit and carry out mathematical imitation on the model.Accuracy of the model is checked using finite element analysis with Ansoft Maxwell 2D.
出处
《上海电机学院学报》
2014年第4期212-217,共6页
Journal of Shanghai Dianji University
基金
国家自然科学基金项目资助(51377104)
上海市闵行区产学研合作计划项目资助(2013MH109)
关键词
异步电动机
匝间短路
故障建模
二阶
induction motor
inter-turn short-circuit fault
fault modeling
second order